Got this in pieces a while back. Put it back together and it was working fine back in the spring other than a slight bit of regulator creep. I tried rebuilding the reg, but it's culminated in me finding some of the internal threads were damaged it looks like from the factory. I can't find identical threads in the hardware store or in my tap set. I've contacted everyone from GI to Inception to see if I could find out what they were but no luck.
Will include the gun and most of a working rip clip (missing hopper, rail clamp and halo style anti jam spring). I'll also throw in some misc parts I have for it (detents, misc screws, reg seat). You will definitely need either a Relay ASA or some other type of Mini ASA and a BT4 feedneck to use this. Other (minor) issues are a grip screw that's slightly too long and it's missing the sliding door that covers the velocity adjuster. Also some slight bubbling in that paint all over really.
Like I said this was working fine in the spring other than a bit of reg creep, but I can't guarantee it will only need a new reg and be good to go.
Looking for SOLD $110 USD SOLD plus shipping (from Canada) OBO.
Any questions please ask.
Sent from my Pixel 4a using Tapatalk
Will include the gun and most of a working rip clip (missing hopper, rail clamp and halo style anti jam spring). I'll also throw in some misc parts I have for it (detents, misc screws, reg seat). You will definitely need either a Relay ASA or some other type of Mini ASA and a BT4 feedneck to use this. Other (minor) issues are a grip screw that's slightly too long and it's missing the sliding door that covers the velocity adjuster. Also some slight bubbling in that paint all over really.
Like I said this was working fine in the spring other than a bit of reg creep, but I can't guarantee it will only need a new reg and be good to go.
Looking for SOLD $110 USD SOLD plus shipping (from Canada) OBO.
Any questions please ask.
Sent from my Pixel 4a using Tapatalk
Comment