ASP CAR-15 Phantom Valve and Buttstock - SOLD
Stock image - mine was mounted a few times but looks perfect.
"The valve is simply a CCI valve body with a captive threaded ring attached – the 6-position buttstock (shown fully collapsed) can be quickly removed without tools. The buffer tube is ‘commercial spec’ sized, so the stock itself can be swapped out if you prefer to use your own. Note that the stock and ring will interfere with the end cap on a standard stock class feed – if you want to run SC, you’ll need a Stripes feedtube or other raised SC feed."
Stock image - mine was mounted a few times but looks perfect.
"The valve is simply a CCI valve body with a captive threaded ring attached – the 6-position buttstock (shown fully collapsed) can be quickly removed without tools. The buffer tube is ‘commercial spec’ sized, so the stock itself can be swapped out if you prefer to use your own. Note that the stock and ring will interfere with the end cap on a standard stock class feed – if you want to run SC, you’ll need a Stripes feedtube or other raised SC feed."
Comment