Black magic universal cup seals

[Ecapnation]

Black magic universal cup seals
These will fit nearly anything, predominantly I find them most useful for nelson based pumps. The hole isn't threaded but is small enough to work with 6-32 threaded power tubes

$8 each
$20 for 4
$40 for 10

(I can get creative and fit over 20 in a small flat rate.)

Shipping not included US sales only.... And I only use flat rate boxes so add 10.40

First is a phantom then lapco gray ghost, then rust bucket nelspot, and finally pure line SI.

THESE DO NOT FIT TRACERS OR TAGMASTERS

[BrickHaus]

These work on a gotcha deuce correct?

I'm likely gonna need a few at least.

[Ecapnation]

I'll check on my ace.... So long as it's a conventional cup seal it should.

Things like the rangers, tracers, and so boss not so much

[BrickHaus]

I honestly don't know Nelson's well. But the dauce has a brass cupseal with a seal pressed in. I have mine almost apart, but I can snap a pic of the seal when I get home.

[Ecapnation]

If the seal is in the brass part you should be ok.... Check the threads on the power tube if they are 6-32 or 8-32 you shouldn't have any issue

[BrickHaus]

10-4. I'll pm ya for payment if they look like they will work.

[Psycho91]

I swear I have one that says it works in a trracer and tagmaster, I could be wrong though

[Grendel]

If it uses a Cup Seal and Power tube (essentially every Nelson Clone) these will work without an issue. Most STBB markers they will work (Spyder, Illustrators, Defiants...etc). They work for replacement seals for most cup seal situations. Over the years I have replaced my stock cup seals with these as the stock ones wear out and have never had to replace one. Nikki Wilson (NW) was not helping her bottom line when she came up with these. IIRC Nikki came up with these just a couple years before she closed up NW Paintball Products. Nikki is an interesting historical topic

Back of the package (Ecapnation was nice enough to send a few to me as part of a wonderful care package):

[OpusX]

I thought these were the magic Spyder/STBB ones...hmmm

[Grendel]

Well they are Black Magic Cup Seals and will work on STBB so in a way they are just not the ones you are referring too? I never really was a Spyder person, started too earlier and went quickly from a pump to an F1 then an Automag in the early 90s before Spyders became popular.

[Ecapnation]

Iirc the packaged them as both.... But funny fact Spyder cupseals also work in some nelsons

[The Inflicted]

Anyone tried these on a VM?

[Ecapnation]

The valve stem is part of the cupseal on those . Won't work unless you make a stem

[The Weltman]

I'll take a four pack.

[XEMON]

What's the difference between the different color? different threads?

[Ecapnation]

Just different colors.... It's aluminum ring for decoration

[Ecapnation]

Bump! Still have a few hundred