Sold sold sold sold
This is an early S5 body that uses Angel feednecks and threaded detents vs wire. No sight rail either. This body also has no serial number, making it an early prototype. Confirmed both by this Bacci article and by Bill Holstein himself when I posted about it in a CCM group:
Please note that this is not tuned and ready to go. While it will be leak-free (should be, haven't aired it up with the CCM fittings) the reg needs to be sweet spotted with the marker to shoot properly. Adjuster on the Stabilizer is currently backed out to 0. At some point in this body's life, it was milled down and drilled/tapped for a Phantom stock class feed block. The one included had some modification done to fit the body nicely. When using a feedneck there will be a couple threads visible, but it holds very sturdy and won't come undone easily.
I can also include a Shaft FR barrel back (no inserts) and I also have three Lapco Fuse tips that work with Shaft backs in 12" 14" and 16". The joiner does have some idiot marks on one end, but doesn't affect usability and is hidden anyway. Overall, good shape some nicks and obvious signs of use/age. The body has a bit of a brushed look to it in certain light as if someone lightly took some steel wool to it, but it's not super noticeable - tried to capture this. Both front and rear trigger frame holes have been properly helicoiled. Solid marker, it was fun to gather the parts and build it. Had high hopes, but honestly can't justify keeping this one unfortunately.
$750 for the marker + Shaft FR back and the three Fuse tips US only. If this asking price is met for everything I will include and and ship it in an HK XL Exo 2.0 marker case at no extra cost. Plus a bunch of spare bits not pictured. No trades, and not parting at this time.
Part List:
Dust black Benchmark '99 Autococker slide frame
Hogue 1911 palm swell grip panels
Dust/matte black S5 (pump) vertical ASA
Delrin CCM bolt and pin
CCM hammer, hammer and valve springs
CCM cocking rod
Dust black CP direct mount
CCM semi gloss black deluxe pump kit
CCM semi gloss Angel feedneck
CCM 6 hole IVG
CCM semi gloss black air fittings
Autocockerparts.com detent and sealing o-ring'd jam nut
Unknown valve and stem, looks like one of those WGP style "LP" valves with holes on top and bottom.
Palmer's Stabilizer regulator
Red Shocktech trigger "pants"
Mozak Machine 3D printed "snatch grip" to fill the blank space behind the trigger frame.
(Click image to enlarge)
This is an early S5 body that uses Angel feednecks and threaded detents vs wire. No sight rail either. This body also has no serial number, making it an early prototype. Confirmed both by this Bacci article and by Bill Holstein himself when I posted about it in a CCM group:
Please note that this is not tuned and ready to go. While it will be leak-free (should be, haven't aired it up with the CCM fittings) the reg needs to be sweet spotted with the marker to shoot properly. Adjuster on the Stabilizer is currently backed out to 0. At some point in this body's life, it was milled down and drilled/tapped for a Phantom stock class feed block. The one included had some modification done to fit the body nicely. When using a feedneck there will be a couple threads visible, but it holds very sturdy and won't come undone easily.
I can also include a Shaft FR barrel back (no inserts) and I also have three Lapco Fuse tips that work with Shaft backs in 12" 14" and 16". The joiner does have some idiot marks on one end, but doesn't affect usability and is hidden anyway. Overall, good shape some nicks and obvious signs of use/age. The body has a bit of a brushed look to it in certain light as if someone lightly took some steel wool to it, but it's not super noticeable - tried to capture this. Both front and rear trigger frame holes have been properly helicoiled. Solid marker, it was fun to gather the parts and build it. Had high hopes, but honestly can't justify keeping this one unfortunately.
$750 for the marker + Shaft FR back and the three Fuse tips US only. If this asking price is met for everything I will include and and ship it in an HK XL Exo 2.0 marker case at no extra cost. Plus a bunch of spare bits not pictured. No trades, and not parting at this time.
Part List:
Dust black Benchmark '99 Autococker slide frame
Hogue 1911 palm swell grip panels
Dust/matte black S5 (pump) vertical ASA
Delrin CCM bolt and pin
CCM hammer, hammer and valve springs
CCM cocking rod
Dust black CP direct mount
CCM semi gloss black deluxe pump kit
CCM semi gloss Angel feedneck
CCM 6 hole IVG
CCM semi gloss black air fittings
Autocockerparts.com detent and sealing o-ring'd jam nut
Unknown valve and stem, looks like one of those WGP style "LP" valves with holes on top and bottom.
Palmer's Stabilizer regulator
Red Shocktech trigger "pants"
Mozak Machine 3D printed "snatch grip" to fill the blank space behind the trigger frame.
(Click image to enlarge)
Comment