For some reason I'm hesitant to sell this... so let's get this sold before I change my mind again. Picked this up locally, had the wrong spring and a bolt pin that looks like it's gone through a garburator. Now has a proper ID main spring, a full rebuild, CP rail, on/off and a better bolt and pin (taken from a 2k5 Black Magic) It's fully operational without any leaks. I have a shooting video as well I'll figure out how to post. It shoots nicely and I was impressed at how quiet it was.
Quirks: This does have a few minor quirks, but it works so well as it's currently set up there is no need to address the issues. That said I want to provide full disclosure. I believe the pump sled is slight off, and may need a bit of a sanding if you're using a shorter/smaller bolt. I but an ID bolt in and the bolt would bind. With the longer Black Magic bolt there is no issue. It's also got a fairly stiff pump return spring. I tried to put a light one in and it had binding issues, but with the current stronger spring there is no issue at all. Barrel has anno wear at the tip but internal of the barrel is nice and smooth.
The pump kit has a bit of twist to it as well. A thicker bore barrel will help keep the pump kit from twisting. I didn't have an issue when I was shooting it but I'm primarily a pump player.
Specs:
Single finger (more like 1.5) WGP trilogy frame
Trinity Trilogy Pump Kit (I believe)
Halfblock and custom anno'd Trilogy Body
Gen X2 Reg (freshly serviced)
CP rail and on/off
Orignal-style Stiffi Barrel
$350 USD plus shipping. (Usually $20-30 but will provide quote)
$300 without the barrel.
Quirks: This does have a few minor quirks, but it works so well as it's currently set up there is no need to address the issues. That said I want to provide full disclosure. I believe the pump sled is slight off, and may need a bit of a sanding if you're using a shorter/smaller bolt. I but an ID bolt in and the bolt would bind. With the longer Black Magic bolt there is no issue. It's also got a fairly stiff pump return spring. I tried to put a light one in and it had binding issues, but with the current stronger spring there is no issue at all. Barrel has anno wear at the tip but internal of the barrel is nice and smooth.
The pump kit has a bit of twist to it as well. A thicker bore barrel will help keep the pump kit from twisting. I didn't have an issue when I was shooting it but I'm primarily a pump player.
Specs:
Single finger (more like 1.5) WGP trilogy frame
Trinity Trilogy Pump Kit (I believe)
Halfblock and custom anno'd Trilogy Body
Gen X2 Reg (freshly serviced)
CP rail and on/off
Orignal-style Stiffi Barrel
$350 USD plus shipping. (Usually $20-30 but will provide quote)
$300 without the barrel.
Comment