Need to give up on this project for other things in life! Just add your favorite pneumatics or pump kit and ASA.
Please read entire description.
Most of a really nice black (more like a "black cherry" in my opinion) to red fade ANS GX-3 Autococker. Not in perfect condition, but in good shape! idiot marks from age and previous owners as you will see on the feedneck, actuating rod hole, and here 'n there.
Gave it a good cleaning, lubed o-rings and hammer. The rear screw that holds the dialer in place is a little too long, please keep this in mind! The beavertail added the necessary girth, but that was all bent up and useless. I have a screw in there that holds it, but you will want a shorter one. I added new "low pressure" springs but it will come with the stock springs. Lower tube is the stock dialer, hammer, "Xtreme" flow valve and stem. Jam nut has an o-ring which is great.
The regulator is in great shape, I will include a brand spanking new rebuild kit along with it. I do not know if it actually needs a rebuild or not, but if it does you are prepared! No gauge included.
The trigger frame has Hogue palm swell panels and a brand new roller sear from autocockerparts.com, and OG red Shocktech trigger pants. Feels so gooood.
I do not know if the vertical ASA o-ring needs replacing. This uses the 12-point bolt, but I will toss in a new stainless socket head vertical ASA screw.
The Quickpull bolt has wear, but the breech of the marker is clean. The back block on these are neat. Has a stainless sleeve with divets for the ballbearings of the bolt on the side and top/bottom.
This will come with a new black detent and a black adjustable cocking rod from autocockerparts.com. The stock silver cocking rod is also included.
The CP barrel pictured is not included.
$215 shipped in a USPS Medium Flat Rate box and its yours.
Please read entire description.
Most of a really nice black (more like a "black cherry" in my opinion) to red fade ANS GX-3 Autococker. Not in perfect condition, but in good shape! idiot marks from age and previous owners as you will see on the feedneck, actuating rod hole, and here 'n there.
Gave it a good cleaning, lubed o-rings and hammer. The rear screw that holds the dialer in place is a little too long, please keep this in mind! The beavertail added the necessary girth, but that was all bent up and useless. I have a screw in there that holds it, but you will want a shorter one. I added new "low pressure" springs but it will come with the stock springs. Lower tube is the stock dialer, hammer, "Xtreme" flow valve and stem. Jam nut has an o-ring which is great.
The regulator is in great shape, I will include a brand spanking new rebuild kit along with it. I do not know if it actually needs a rebuild or not, but if it does you are prepared! No gauge included.
The trigger frame has Hogue palm swell panels and a brand new roller sear from autocockerparts.com, and OG red Shocktech trigger pants. Feels so gooood.
I do not know if the vertical ASA o-ring needs replacing. This uses the 12-point bolt, but I will toss in a new stainless socket head vertical ASA screw.
The Quickpull bolt has wear, but the breech of the marker is clean. The back block on these are neat. Has a stainless sleeve with divets for the ballbearings of the bolt on the side and top/bottom.
This will come with a new black detent and a black adjustable cocking rod from autocockerparts.com. The stock silver cocking rod is also included.
The CP barrel pictured is not included.
$215 shipped in a USPS Medium Flat Rate box and its yours.
Comment