One of the higher end Piranha models with a fade anno and neat looking gill cuts. Has a scratch on the passenger side and a dent in the sight rail on the driver's side. Otherwise just the normal minor cosmetic issues. The feedneck is sized for Viewloaders (my Revvy is a bit loose but a VL200 fits nicely).
It has a PMI Turbo Valve, a front block with big air passages and a volumizer with a piston (I guess this is to compensate for dropping pressure when firing) for LP mods. It has a flush cocking bolt (has some wear on top) and a thumb velocity adjuster (missing the locking setscrew).
You will likely want to replace the detent as this one gets occasional rollouts when running and shaking the gun. Doc makes a longer detent and Techt makes a fatter style detent like the original vs the modern thinner ones.
The gun itself has been rebuilt and holds air and dry fires (was recocking with pressure down to around 200psi). That is the extent of my testing. The regulator has just been cleaned from the rotting urethane orings, but not tested or rebuilt (the reg seat looks to be in good condition).
Looking for *SOLD* $60 CAD *SOLD* plus shipping (from Canada). Comes with 2 mainsprings of unknown strength. Any questions please ask.
Sent from my Pixel 4a using Tapatalk
It has a PMI Turbo Valve, a front block with big air passages and a volumizer with a piston (I guess this is to compensate for dropping pressure when firing) for LP mods. It has a flush cocking bolt (has some wear on top) and a thumb velocity adjuster (missing the locking setscrew).
You will likely want to replace the detent as this one gets occasional rollouts when running and shaking the gun. Doc makes a longer detent and Techt makes a fatter style detent like the original vs the modern thinner ones.
The gun itself has been rebuilt and holds air and dry fires (was recocking with pressure down to around 200psi). That is the extent of my testing. The regulator has just been cleaned from the rotting urethane orings, but not tested or rebuilt (the reg seat looks to be in good condition).
Looking for *SOLD* $60 CAD *SOLD* plus shipping (from Canada). Comes with 2 mainsprings of unknown strength. Any questions please ask.
Sent from my Pixel 4a using Tapatalk
Comment