SOLD the rest on eBay.
UPDATE: I'll let these sit for another week or so, then I'll probably dump the whole lot on eBay, see if they go then.
I have a collection of mainly ex-rental STBB. NONE of these work. All are dirty, some quite filthy. Most are Spyder XTRA's, 2009 generation if I recall right. Won't work with the newer XTRA parts is what I"m saying. Also some similar-gen Victors, which do work with newer parts a little better. And a couple of oddball ones. See photos. Each one is numbered. Each picture shows what you get. Only two or three could be called complete, and they don't shoot consistently if they hold pressure at all. A few more are near complete, mainly missing that darn XTRA detent. They get worse as they go along. Some are obviously just for parts, as you can see. I make zero guarantees on any of them though.
Guns weigh 3 lbs each. I weighed a few and that was average. The ones with more missing stuff weigh a little less, yes, but three pounds is average. I'm giving them up at shipping rate plus any associated PayPal fees for said shipping. Take a few, take them all, or take none and thanks for looking just the same. If you are local (in Utah) you can come get as many as you want for free too. First come-first served. Just trying to clean out the storage room. I made a few project guns out of parts from these, but I don't have time, money, or energy to do something with most of them.
I work long hours, so please be patient. I will get back to you. Each picture is what you get. Just let me know what numbers and where to ship and I'll get you a quote. Remember, completeness varies greatly, especially internally. Thanks
#1 - Grade A. Complete or real close. With a little work, this would be a shooter again. GONE _ GONE _ GONE _ GONE
#2 - Grade B - No detent, missing frame screw, something wrong with drop forward screws. I believe that is all that is missing. Would take some work to fix.
#3 - Grade D - All I recall specifically about this one is that it has a spyder-threaded (90% sure it's spyder) brass barrel. I believe it is complete, but I couldn't get it to recock despite working on it.
#4- Grade B or B minus - It's got the detent at least. I think I never even broke this one down to see the internals. No promises, but looks ok from the outside.
FOUR IS GONE_GONE_GONE_GONE
#5- Grade D - I took spare parts and Frankensteined them. It gets at least a D and not an F because at least it has all parts, even though it never worked. Wouldn't recock, as I recall.
#6- Grade B - It's missing the detent, but I believe the internals are all there.
#7- Another B grade. I believe it is just missing the detent. Has non-standard grip panels. Probably a project I was planning on tinkering on.
#8- Another B grade. Probably just missing the detent.
#9 - Another B grade. Missing the detent, obviously, other than that, couldn't say.
#10 - Grade B. It's got the detent, but I think it is sprung, or just the cover. The rest is unknown.
#11- I'm calling this a C grade. I put this together with the last of the spare parts to make it as complete as I could. It is only missing, to my knowledge, the detent, the grip frame screws, and the drop forward screws. The function is entirely a guess though. It was built from parts.
#12- Grade D at best. Mostly parts. Has some lower tube internals at least, may have all but in rough shape. Xtra grip frame on a Victor. Placeholder screws for front valve and front grip frame. I think the mainspring is crap too, if i remember right.
#13- D minus. This was a project. The valve pin has been modded to not blow back. Was working on a cocker-like. Lots of parts missing, mods may or may not work.
#14 - D minus. This was also a project like #13. The valve pin has been modded to not blow back. Was working on a cocker-like. Lots of parts missing, mods may or may not work.
#15- Grade B minus - As close to a complete Victor as I had parts to do. I think all it is missing is the feedneck and the union for the braided line to the ASA. But no promises..
#16- Grade D? Was obviously a project or the beginning of one. An Xtra body, no bolt it looks like, with Victor grip frame with a non-standard braided line. Nonstandard ASA isn't attached to the frame, if I recall right. Internals are anyone's guess.
#17- Grade F - Missing important screws, obviously. Internals are only 3/4 there. Just parts.
Thanks for looking.
UPDATE: I'll let these sit for another week or so, then I'll probably dump the whole lot on eBay, see if they go then.
I have a collection of mainly ex-rental STBB. NONE of these work. All are dirty, some quite filthy. Most are Spyder XTRA's, 2009 generation if I recall right. Won't work with the newer XTRA parts is what I"m saying. Also some similar-gen Victors, which do work with newer parts a little better. And a couple of oddball ones. See photos. Each one is numbered. Each picture shows what you get. Only two or three could be called complete, and they don't shoot consistently if they hold pressure at all. A few more are near complete, mainly missing that darn XTRA detent. They get worse as they go along. Some are obviously just for parts, as you can see. I make zero guarantees on any of them though.
Guns weigh 3 lbs each. I weighed a few and that was average. The ones with more missing stuff weigh a little less, yes, but three pounds is average. I'm giving them up at shipping rate plus any associated PayPal fees for said shipping. Take a few, take them all, or take none and thanks for looking just the same. If you are local (in Utah) you can come get as many as you want for free too. First come-first served. Just trying to clean out the storage room. I made a few project guns out of parts from these, but I don't have time, money, or energy to do something with most of them.
I work long hours, so please be patient. I will get back to you. Each picture is what you get. Just let me know what numbers and where to ship and I'll get you a quote. Remember, completeness varies greatly, especially internally. Thanks
#1 - Grade A. Complete or real close. With a little work, this would be a shooter again. GONE _ GONE _ GONE _ GONE
#2 - Grade B - No detent, missing frame screw, something wrong with drop forward screws. I believe that is all that is missing. Would take some work to fix.
#3 - Grade D - All I recall specifically about this one is that it has a spyder-threaded (90% sure it's spyder) brass barrel. I believe it is complete, but I couldn't get it to recock despite working on it.
#4- Grade B or B minus - It's got the detent at least. I think I never even broke this one down to see the internals. No promises, but looks ok from the outside.
FOUR IS GONE_GONE_GONE_GONE
#5- Grade D - I took spare parts and Frankensteined them. It gets at least a D and not an F because at least it has all parts, even though it never worked. Wouldn't recock, as I recall.
#6- Grade B - It's missing the detent, but I believe the internals are all there.
#7- Another B grade. I believe it is just missing the detent. Has non-standard grip panels. Probably a project I was planning on tinkering on.
#8- Another B grade. Probably just missing the detent.
#9 - Another B grade. Missing the detent, obviously, other than that, couldn't say.
#10 - Grade B. It's got the detent, but I think it is sprung, or just the cover. The rest is unknown.
#11- I'm calling this a C grade. I put this together with the last of the spare parts to make it as complete as I could. It is only missing, to my knowledge, the detent, the grip frame screws, and the drop forward screws. The function is entirely a guess though. It was built from parts.
#12- Grade D at best. Mostly parts. Has some lower tube internals at least, may have all but in rough shape. Xtra grip frame on a Victor. Placeholder screws for front valve and front grip frame. I think the mainspring is crap too, if i remember right.
#13- D minus. This was a project. The valve pin has been modded to not blow back. Was working on a cocker-like. Lots of parts missing, mods may or may not work.
#14 - D minus. This was also a project like #13. The valve pin has been modded to not blow back. Was working on a cocker-like. Lots of parts missing, mods may or may not work.
#15- Grade B minus - As close to a complete Victor as I had parts to do. I think all it is missing is the feedneck and the union for the braided line to the ASA. But no promises..
#16- Grade D? Was obviously a project or the beginning of one. An Xtra body, no bolt it looks like, with Victor grip frame with a non-standard braided line. Nonstandard ASA isn't attached to the frame, if I recall right. Internals are anyone's guess.
#17- Grade F - Missing important screws, obviously. Internals are only 3/4 there. Just parts.
Thanks for looking.
Attached Files
Comment