Refurbished Syder Victor

[fastbus]

Hey folks, I bought a refurbished Spyder Victor off ANSgear for the purpose of converting to pump. Little did I know they'd shove the front plug screw in so deep it'd render it impossible to remove with my limited arsenal of tools. Thus, the marker is useless to me, although it presumably works great otherwise (haven't gassed up/shot).

Asking $45 shipped for this because I did scuff up the paint near the front screw in my efforts to get it out - see photos. Will of course include the barrel as well.

[COB]

Not to be an ass, but you may have been using the wrong size Allen wrench. I've encountered this problem before. Sometimes, you can remove the grip screws with a standard 1/8" Allen, but then it does not work on the plug screw. I think that requires a 3mm wrench. Actually, I think the 3mm is correct for all of the screws, just the front plug screw seems to be a little more difficult to break free. I do know that the screws have blue Loctite on the threads from the factory.