Stupid request/WTB - BE Samurai Barrel

[ChoSanJuan]

I've got a dumb project idea and I need that specific piece to bring forth my flavor of stoopid. Who's holding out on me?

[ChoSanJuan]

Bump

[ChoSanJuan]

Anyone?



(Bump)

[The Great Equalizer]

I'm relatively sure the Samurai had the same barrel as either a Brass Eagle TigerShark or the Raptor/Rainmaker. The Samurai was a short lived model so very few people would pick up on your question.
- If its a TigerShark barrel there pretty much weren't any aftermarket options so you may have to look for a full TigerShark on ebay, but they're cheap.
- If its a Raptor/Rainmaker barrel you should be able to find lots of compatible barrels.

FYI if your project is freak boring, I know the TigerShark barrels can be freak bored because I have a few TigerSharks freak bored and velocity mod'd.

[Macdave06]

I'm relatively sure the Samurai had the same barrel as either a Brass Eagle TigerShark or the Raptor/Rainmaker. The Samurai was a short lived model so very few people would pick up on your question.
- If its a TigerShark barrel there pretty much weren't any aftermarket options so you may have to look for a full TigerShark on ebay, but they're cheap.
- If its a Raptor/Rainmaker barrel you should be able to find lots of compatible barrels.

FYI if your project is freak boring, I know the TigerShark barrels can be freak bored because I have a few TigerSharks freak bored and velocity mod'd.

Rainmakers are cocker threaded. Just FYI.

Sent from my SM-G960U1 using Tapatalk

[The Great Equalizer]

Thank you. I swore that Brass Eagle had 2 guns with Raptor threading, but I can't think of anything from the era except Tiger Shark, Stingray, Raptor and Rainmaker, so I guess not.

[ChoSanJuan]

Yeah, the Tigershark takes Raptor/Illustrator threads... It's just the shank is a different length. It needs it be cut down for the Tigershark to thread in properly.

[ChoSanJuan]

I'm relatively sure the Samurai had the same barrel as either a Brass Eagle TigerShark or the Raptor/Rainmaker. The Samurai was a short lived model so very few people would pick up on your question.
- If its a TigerShark barrel there pretty much weren't any aftermarket options so you may have to look for a full TigerShark on ebay, but they're cheap.
- If its a Raptor/Rainmaker barrel you should be able to find lots of compatible barrels.

FYI if your project is freak boring, I know the TigerShark barrels can be freak bored because I have a few TigerSharks freak bored and velocity mod'd.

Nope, my project isn't for freak boring. I'm well aware of the short production run of it. Also, I specifically want the Samurai barrel for its stupidly short length and the fact that it's cocker threaded. I had one a long time ago (the barrel, not the whole marker) and am super mad I can't find it now.

[The Great Equalizer]

I saw 5 of them on eBay, but this is the cheapest.
https://www.ebay.com/itm/32529913401...Bk9SR7Sa2e3nYA

If they take an Autococker thread this should be easy to re-sell for pretty much the same amount after you get the barrel.

[ChoSanJuan]

Hah! That's great! I don't want to spend on the whole marker. If it comes down to it, I'll have to... but not that desperate yet.

[ChoSanJuan]

Not to necro this thread, but I FOUND ONE!!!! Thanks for all the suggestions on trying to source one. Lady luck said to just give me one. It landed in my lap at my local field.

(Mods please close, thanks!)