Announcement

**XEMON** · 07-13-2020, 11:31 AM

Let me put the cocker LPR seat here

- TIPX "window" filler
- Automag powerfeed plugs

i have a few more I'll add tonight
Edit: maybe someday 😅

**Rainmaker** · 07-16-2020, 03:32 PM

ER2 Pump Handle Pins
ER2 Phatty Pump Handle
ER2 Detent
ER2 Horizontal Fixed Feed
TPU 10 rd tube caps
TPU Hopper adapter
Phantom Reverse Feed Block
Phantom Ghost Ring Sight
Stubby Cocker Freak Barrel (a la Thumper)
Phantom Feedbolck (Fwd or Reverse) - see attachment
Splatmaster stock figure 8 bit - see attachment

Attached Files

**JonM** · 07-28-2020, 09:02 AM

CCI Phantom Feedneck Adapter

**nobbie333** · 07-28-2020, 07:25 PM

**nobbie333** · 07-28-2020, 07:26 PM

**OpusX** · 12-04-2020, 03:56 PM

Revolverloader V2 - Paintball Hopper https://www.thingiverse.com/thing:2792384

**JonM** · 12-28-2020, 09:32 AM

I'm adding an extended knurled bolt cap I designed for the Emek & Etha 2.

Emek Extended Knurled Bolt Cap by PhantomJM

https://www.thingiverse.com/thing:4699872

This bolt cap is 1 cm longer than the stock cap and has a knurled surface for grip.

I'm also adding two additional bolt caps that are much easier to grab than the stock cap.

Easy Grip Emek Bolt Cap by PhantomJM

https://www.thingiverse.com/thing:4700130

This cap makes grabbing and removing the bolt easier than with the stock cap. It is compatible with both the Emek and Etha 2.

Easy Grip Emek Bolt Cap (Grooved) by PhantomJM

https://www.thingiverse.com/thing:4700135

This cap makes grabbing and removing the bolt easier than with the stock cap. It is compatible with both the Emek and Etha 2.

**JonM** · 01-01-2021, 12:51 PM

Here's a replacement front feed cap for Sheridan & PMI brass markers.

Sheridan Front Feed Cap by PhantomJM

https://www.thingiverse.com/thing:4705273/files

This is a replacement front feed cap for Sheridan and PMI brass stock class paintball markers. For best results, sand the front with finer grits until smooth.

**ChoSanJuan** · 01-19-2021, 01:08 PM

Smart Parts Ion Tray - Mount a Firing Can to your Grip Frame without a body!

Smart Parts Ion Tray by gameblips

https://www.thingiverse.com/thing:4729349

Mount your Firing Can to your Grip Frame without the need for a Body Kit!I have been doing a LOT of buildouts for Mechanical Ions and I thought that a base tray would be great to add to the mix. This also works great for Electropneumatic Ions too! Do not use if your ball detents are not secured. This is a first start to a few new Ion bodies I've been designing. (Coming soon!)

**ChoSanJuan** · 01-26-2021, 03:43 PM

Since I've been so Mech Ion crazy recently, I cleaned up my SMAV-3 mount and published it!

Smart Parts Ion Mechanical SMAV-3 Mount by gameblips

https://www.thingiverse.com/thing:4738833

Mount for SMAV-3 on a Smart Parts Mechanical Ion Conversion (v6)Design features include: Rail for easy height adjustment via the groove originally used for the electronics mainboardSingle large mount hole for m4 x 16mm screw (requires a slight mod to allow for the Pan head to clear the inside of the grip, use an equivalent set screw to avoid modding grips/chop the head off and cut a slot for a flathead screwdriver.) Inverse mount holes for your grip panel screws to anchor the mount (optional, needs a swap to Pan Head 6-32 x 3/8 screws)Angled rear to allow for more stabilization against the grip frame

Shhhh, it's actually rev6...

**Rainmaker** · 02-02-2021, 09:29 PM

Phantom ghost ring sight:

Phantom Ghost Ring Sight by cedwards

https://www.thingiverse.com/thing:4748050

Phantom Ghost ring sight. Friction fit onto the rail on the tube feed block. print the sight post separate and glue in place

**Rainmaker** · 02-03-2021, 10:35 AM

Phantom reverse feed block. Needs a 8-32, 1/4" long buttonhead screw

https://www.thingiverse.com/thing:4748536

**Spider!** · 02-04-2021, 12:28 AM

I keep forgetting to put some stuff in here.

TPU (soft) stuff;
APP50 hopper speed feed, https://www.thingiverse.com/thing:4743495
APP50 hopper lid tensioner band, https://www.thingiverse.com/thing:4743495
Sheridan PMI 12g seal; https://www.thingiverse.com/thing:4590724

Flex98A stuff (stiff stuff);
CCI pierce pin seal, https://www.thingiverse.com/thing:4590741
Feed tube ball retainers, https://www.thingiverse.com/thing:4310920
Tread-style butt plate for Donno's 2 inch bottle stock, https://www.thingiverse.com/thing:4390269

PLA/ABS fiddly bits;
Revy loader parts, https://www.thingiverse.com/thing:4420624
Automag picatinny rails, https://www.thingiverse.com/thing:4261592
ICD 12g changer pull/anti-snag knob, https://www.thingiverse.com/thing:3667065
Stock Emek body sight rail, https://www.thingiverse.com/thing:3467457
Bottle reg protector cap (easy print), https://www.thingiverse.com/thing:4741432

**Spider!** · 06-03-2021, 04:26 PM

I think this is Craig Palmer. At least someone that is using the PPS logo on thingiverse. Nice tubing/filament/pill/wire cutter/stripper. My PLA Pro version went together perfectly. I was looking for a use for my DE razor blades, but this is for a single sided blade. Still good as a print and go thing though.

Palmer's Pocket Razor Blade Tube Filament Cutter Plus Box Opener And Wire Stripper Pill Splitter Slicer by Paintballmagic

https://www.thingiverse.com/thing:665862

I got tired of buying tube cutters that were unable to keep an edge. Now I can buy cheap razor blades as replacements. If you have a filament 3d printer (FDM), Then this cutter ( I use daily ) is a must have. Cuts Up to 1/4 (6mm) tubing.Cuts 1.75 or 3mm filament with a strait edged or at an angle for easy feeding. Recommended usage for feeding a new filament roll. Cut the filament at an angle for easy installs with PTFE lined extruders. This also works well at opening boxes and vacuum sealed filament rolls. See the instructions. This item makes a great gift. Just about everyone can find a use for it. Edit: Now scaled to mm and a single file.Version 8 cut was moved from 66 to 70 degrees.Added Grooves for pill cutting.

Announcement

Paintball STL Repository

Paintball STL Repository

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment