Making the Qloader actually work

[_Boris_]

may be a dumb question, any reason why Qloader can't be motorized? It was designed when LiPos did not really exist, not as common, today you can get very high capacity, high current LiPos easy. A lot of motors are much more powerful, thanks to all the amps you can draw from LiPos.

How reliable is the spring winding? If it's hooked up to eyes directly, it should not be any different than most motorized hoppers and you don't have to deal with pre-winds, unwinds. ... you can probably make the pods slightly smaller too (but that would be a really big ball of wax to open)

[Levi]

Not a dumb question at all. The springs have been pretty reliable, but there’s no reason you can’t eliminate them and create a motorized socket. I’ve seriously considered this myself. You could eliminate some issues by going electronically controlled. The ball stack compression that UvHalo pointed out could be eliminated by backing off the force when idle. Lots of stuff you could do once you go this route. Just a matter of how much effort you wanted to put in.

[thedqlegend]

If anyone is interested in buying any qloader I have a warehouse full of inventory. Please feel free to email me at d.t.henderson98@gmail.com with a subject line of qloader.

[Levi]

If anyone is interested in buying any qloader I have a warehouse full of inventory. Please feel free to email me at d.t.henderson98@gmail.com with a subject line of qloader.

Very curious.. what is the backstory on how you ended up with a warehouse full of Qloader stuff? Could be an interesting story & I'd love to hear it!

[Carp]

[thedqlegend]

Very curious.. what is the backstory on how you ended up with a warehouse full of Qloader stuff? Could be an interesting story & I'd love to hear it!

Hey Levi saw your email replied as well as sent you some pictures

[thedqlegend]

Hey carp i understand it sounds sus and if you reach out I’ll gladly tell you the same thing I emailed levi

[motherboard]

Note the Single trigger, and home made steel butt stock mount to replace the cheap plastic junk that broke. The bottom half of the SP8 made of aluminum but the top half of the military looking eye candy is just plastic and suffers from some of the same things the Qloader does.

Hey SUS, those Custom Mounting Sockets you're showing look different than the ones I have, are they made of a different type of plastic? the entire thing should have been made of polycarbonate like the outside of the Qpods.