That's not a pile of poo, dude. That's the $h!t. Nicely done.
-
-
Holy shit
don't think I've seen somebody cast their own frame before
Comment
-
I do like that single finger 86 spyder frame. Well done.Velcor will save us...
Current MCB Feedback : https://www.mcarterbrown.com/forum/b...opusx-feedback
Legacy MCB Feedback (Wayback Machine)Comment
-
You really made something cool here.
Comment
-
Updates...
So I have designed a sled for the bolt which the pump rod will attach to, I have printed it out and sprued it up ready for lost pla ceramic shell casting in aluminum. I have also finished turning down the pump arm, or rod idk which is which lol I also slightly bored out the pump arm to add more volume for trying to go low pressure.
Gas, Grass or Brass, no one rides for free...Comment
-
Your project is coming along very nicely. I definitely need a 3d printer in my lifeComment
-
So I have finished up the sled, cut the bolt down and cast smoke pump handle and grip panels. I have powder coated the frame. Now I just have design an adapter to attach the pump to the sled, I have drilled and tapped the sled but theres not quite enough meat on the pump handle for a direct connection. Other than that I have to anno and should be done!
Sent from my SM-N950U using Tapatalk
Gas, Grass or Brass, no one rides for free...Comment
-
So this weekend if finished the back plate for the pump handle and tapped the stainless rod for the linkage.
Sent from my SM-N950U using Tapatalk
Gas, Grass or Brass, no one rides for free...Comment
-
Finished up the build, sorry I didnt document some of the final parts, have been busy and had to rush to finish it up before the deadline. I slotted the hammer/striker, welded the cup seal, and annod the body and front block. Total spent was $51.94 for the barrel, stainless rod, and lp spring kit.
Sent from my SM-N950U using Tapatalk
Gas, Grass or Brass, no one rides for free...Comment
-
Next time can you make one hoselessComment
Comment