I have been working hard to clear some projects off the bench and just finished this one up. This is a pre2k cocker body that has been converted to a pnuecocker. My goal was to keep it as stock, old and crappy looking as possible while making it shoot as fast as possible. On the outside she is mostly stock except the frame and the reg (I am probably going to ditch the reg and put an old expansion chamber on and just run a LP tank reg) but on the inside she is loaded. Inception Pnuematics, Inception lower tube kit, front was minied and drilled to 2K+ spec and I also gave it more volume. The back block is milled internally to shave weight and the barrel is brass lined with freedummy wedgits. I also milled a slot in the bottom of the body to hide the frame hose.
I ran out of air during testing but I was able to get 8 BPS and should be able to go faster once I put a fresh tank on. The photo was taken pre ASA plumbing and it is missing its bolt which is a very nice old school venturi bolt that doesn't look like anything special from the outside.
I will get a shooting video up in a few days but for now, enjoy the pics:
I ran out of air during testing but I was able to get 8 BPS and should be able to go faster once I put a fresh tank on. The photo was taken pre ASA plumbing and it is missing its bolt which is a very nice old school venturi bolt that doesn't look like anything special from the outside.
I will get a shooting video up in a few days but for now, enjoy the pics:
but not the noobs, one ball the noobs!
Comment