2k9 micromags

[FredMnkyDad10]

if i remember correctly these have velocity issues if you use classic valve. No issue if you use xvalve or rt pro valve.
i have both options the mech and electro version done in gun metal.
both have never been used, not even assembled.

what are they worth?

[BrickHaus]

Dude you literally have a treasure trove.

Micro mags hold value decently last I paid attention. Being thats the bodies are (were) 250 new with the vertical adapters, and you cant get them anymore. Id ask 325 for the mech and 350 for the e mag body and see who bites.

Im not sure what they are actually worth, or if you could ask more than that, but thats what Id shoot for.

Okay, I also just referenced Supermans post in the misc section. He has 2x mm bodies listed. No frednecks or gas throughs, one black one red, and asking 300 for them.

That being said you could potentially ask more, but those ones arent sold yet either so use that information as you see fit.

[superman]

I actually have 4 bodies.
Mine appear to have velocity issues though. I think there are a lot more bodies out there that do have the issue than don’t. I think it was a breach manufacturing error. I think the feedneck is 1/8-1/4” to far forward and creates the blowback into the feedneck. I haven’t done a whole lot of research on it. Maybe I will mod a bolt and see what happens.




Sent from my iPhone using Tapatalk

[Jonnydread]

How come these have velocity issues?

[superman]

I actually have 4 bodies.
I think it was a breach manufacturing error. I think the feedneck is 1/8-1/4” to far forward and creates the blowback into the feedneck. 

pretty sure it was a mistake when they bored the feedneck hole.

[Jonnydread]

superman I missed that part of your post, weird.

[BLachance75]

I thought the velocity issue was related to an alignment issue with where the valve is. I had one at a point that I sent to Luke and he was able to fix the issue by correctly boring it out.

[FredMnkyDad10]

Yes I believe it was due to alignment of the valve. For some reason using an Xvalve on these, you did not have that problem. But how many ppl have or want to spend on a xvalve.

[superman]

Yes I believe it was due to alignment of the valve. For some reason using an Xvalve on these, you did not have that problem. But how many ppl have or want to spend on a xvalve.

I tested all of mine with a valve that didn’t have velocity issues. They would not shoot over 280.


Sent from my iPhone using Tapatalk

[FredMnkyDad10]

I tested all of mine with a valve that didn’t have velocity issues. They would not shoot over 280.


Sent from my iPhone using Tapatalk

Nice.
have you tried an xvalve or rt pro valve?
280 is not bad, remind me if I am wrong but most fields restricts to 300?

Some want you below that even, just t ok be little safer and insurance. I think the last two a played at were at 290 and 280.

[superman]

Nice.
have you tried an xvalve or rt pro valve?
280 is not bad, remind me if I am wrong but most fields restricts to 300?

Some want you below that even, just t ok be little safer and insurance. I think the last two a played at were at 290 and 280.

That was a maximum of 280. Some were as low as 230 with the velocity adjuster all the way in. Same valve in a normal mag was shoot 330+fps.


Sent from my iPhone using Tapatalk

[FredMnkyDad10]

That was a maximum of 280. Some were as low as 230 with the velocity adjuster all the way in. Same valve in a normal mag was shoot 330+fps.


Sent from my iPhone using Tapatalk

oh am not doubting you at all. I was just saying of you are at 280, even with the adjuster all the way in. You are and can get to the velocity that most fields limit you to it.

Unless you playing at outlaw field where any fps goes. Played at outlaw field few times, most guys were cool with doing chrono. But one guy after he shot a player in the hand and the paintball shell got stuck in the skin, tearing it. He would not chrono, shooting way above.

[FredMnkyDad10]

Dude you literally have a treasure trove.

Micro mags hold value decently last I paid attention. Being thats the bodies are (were) 250 new with the vertical adapters, and you cant get them anymore. Id ask 325 for the mech and 350 for the e mag body and see who bites.

Im not sure what they are actually worth, or if you could ask more than that, but thats what Id shoot for.

Okay, I also just referenced Supermans post in the misc section. He has 2x mm bodies listed. No frednecks or gas throughs, one black one red, and asking 300 for them.

That being said you could potentially ask more, but those ones arent sold yet either so use that information as you see fit.

hahahaha wait till you see what else. I have 4 more boxes to go through.
And if I am right there is one or two more thats got me salivating too.

[Rusty Brass]

Roger. Standing by.

[BenoitOWN]

Whoever wanna buy I have a Dukie made adapter for the emag version to make a pneumag out of the battery housing.

[FredMnkyDad10]

Whoever wanna buy I have a Dukie made adapter for the emag version to make a pneumag out of the battery housing.

Dude tell me more, more.