Where to buy brass bar/rod stock?

[DavidBoren]

I am looking for a source/supplier for brass bar or rod stock. Couple feet at first, possibly more later. Between 7/8" and 1-1/8" diameter.

Looking specifically for UNS C73800 alloy, C74000/ASTM B122, or C74500... NOT naval or free cutting brass.

Any ideas where to find it? My Google-fu is weak.

[Bulldogr6]

McMaster Carr but shipping might hurt . What area are you in?

Sent from my E6910 using Tapatalk

[DavidBoren]

Pacific Northwest... more specifically Portland, Oregon.

I didn't see any of the alloys I am looking for on McMaster. I will look again.

I might have found a source of B122 bar stock... Aviva metals, I am requesting a quote.

[XEMON]

It's not solid stock, but I have feed and barrel tube for Sherida. If you're interested (about same size as stock tubes).

[DavidBoren]

Thanks, but I need solid stock. I am hoping to have some strikers made...

[Bulldogr6]

Research the spec you desire and see if if crosses over to something available. Many times the product is the same just measured/ rated with a different spec. This is the case at least in my world, ISO vs SAE, spec all depend on what area it's marked to.

Sent from my E6910 using Tapatalk

[XEMON]

Research the spec you desire and see if if crosses over to something available. Many times the product is the same just measured/ rated with a different spec. This is the case at least in my world, ISO vs SAE, spec all depend on what area it's marked to.

Sent from my E6910 using Tapatalk

True, and often not spec'ed is the same as the spec'ed but without the paperwork ... Came out of the same machine in the same batch