I'm looking to import a CAD model to a phantom assembly assess complexity of a custom build for myself. Does anyone have a CAD model of such a thing kicking around? I really liked the version with a bucket changer along the back of an otherwise normal 45 grip.
-
Paintball Selection and Storage - How to make your niche paintball part idea.
MCB Feedback - B/S/T Listings: -
I can send you pictures on how my Carter Duck is done. You basically need to tap the very end of the of the valve and feed the valve threw the threads of the valve retaining nut. Then you need to shave the piercing pin down so it short enough not to choke. It also has to be tapped on an angle. So the 12g sits flat on face seal. If you change the grip angle it will change the angle the valve needs to be taped. -
The force of a 12g being compressed against a seal can lead to issues gapping the valve/body/lower assy. Unless you have dainty hands and apply the exact same force every time, it can lead to latchup/auto trigger issues.
So beware I suppose. I ran into this issue with my Carter boxgun.Comment
-
It’s a nightmare getting it all to line up because it needs enough to seal but not to much the 12e gets stuck. Took me a while to get my Carter right but wen you do it’s O so sweet!Comment
Comment