instagram takipci satin al - instagram takipci satin al mobil odeme - takipci satin al

bahis siteleri - deneme bonusu - casino siteleri

bahis siteleri - kacak bahis - canli bahis

goldenbahis - makrobet - cepbahis

cratosslot - cratosslot giris - cratosslot

Announcement

Collapse
No announcement yet.

200x?? Spyder Xtra

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    200x?? Spyder Xtra

    Hello

    I picked up this in a small trade for shits and giggles and to have something I can hand to a family member or friend.

    wondering what year spyder xtra so I can buy the right oring kit off eBay..

    hard to find info online but is there anyway to get these to run 300psi? I received a tipmann 98 with a lp kit in the past .

    was potentially gonna buy another deadlywind or just the adapter for my dw x8, a new frame etc but figured I might as well pick up a cheap new mech instead

    so just looking for the oring kit to get it working and info on low pressure
    MY FEEDBACK: https://www.mcarterbrown.com/forum/b...0%99s-feedback

    #2
    This is the first generation Spyder Xtra, circa 2002. It shares almost every part with any Xtra made from 2002-06. Most all of the orings are standard 015 size, replace all the valve and hammer orings with black buna ones, give all orings in it a healthy helping of paintball gun oil and she'll work fine.

    make sure the rubber detent nubbin is there and in good shape. If you can find a new red rubber one, replace it with that, they're slightly longer and help prevent roll outs with todays smaller paint.

    Comment


    • ramagupa

      ramagupa

      commented
      Editing a comment
      Thank you!!

    #3
    These run at 800 psi stock, and as long as you use a 800 output tank you'll be fine. You can use the standard (800psi) pressure tank with your low pressure 98 without issues.

    It takes a lot of modification to get these to run at 300 psi reliably. With a valve change or modification and spring kit you should be able to run this Spyder at 600 psi if you wanted to try. This Spyder does not have a regulator so you will need add one in order to drop the pressure.

    It isn't really worth it unless you enjoy tinkering with spyders. They run great stock.

    Comment


    • ramagupa

      ramagupa

      commented
      Editing a comment
      i also recieved 2 view loader genesis that were in much better shape but don’t cycle i believe because of my tank pressure … the orings on the spyder were toast so i haven’t even tried to air it up tho it’s probably for not. oh well… i at least got two viewloader quantums that may be suitable for pump. if not i’m out a hundred bucks

      but shooting people out with a spyder seemed fun
Working...
X