2k2 Timmy board in gen e matrix?

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • k_obeastly
    commented on 's reply
    I do believe you are correct as I remember a lot of matrix owners firing 3-4 shots into the ground before the start of every speedball game.

  • Jordan
    replied
    Originally posted by k_obeastly
    I find most of the small solenoids like that are going to run at 5V. Does the timmy board have anti FSDO? That would be my biggest concern about putting the board in a spool valve gun.
    The first batch of OG Matrix boards didn't either, IIRC.

    Leave a comment:


  • k_obeastly
    replied
    I find most of the small solenoids like that are going to run at 5V. Does the timmy board have anti FSDO? That would be my biggest concern about putting the board in a spool valve gun.

    Leave a comment:


  • jetenginekyle
    commented on 's reply
    the lcd board has more two buttons, one of which might line up with the led hole on my frame. At least one hole would have to be drilled to make it fit properly.

  • Ecapnation
    commented on 's reply
    Aaah.... Diablo board. Yeah different spacing

  • jetenginekyle
    commented on 's reply
    Forgot something: someone on pbnation found the part number for just the coil part of the matrix noid. ill paste it here just in case something bad happens to pbnation

    https://www.pbnation.com/showthread.php?t=3929854

    credit to user blueshifty--
    "All people looking for a cheap coil... I called SMC USA and had them create a part number for the coil only. The coil part number is V111K-VG and as opposed to ~$60 for the entire assembly, the coil itself runs about ~$14. (Both parts have a ~5wk lead time.)"

  • jetenginekyle
    replied
    for people in the future, here is the info I found before giving up
    1. The matrix solenoid part number is vqz1151K-9g-x86​ i couldn't find the voltage but did find the how to order section of the datasheet which mentions the operating voltage but doesn't have data on our exact part number
    2. vqzhow to order.png



    The noid in my 2k2 has the part number of HEA10FS-GL-101W and states on the label that its rated for 5v. On the label in small print on the bottom right it says 42H not sure what this means but hey it could be useful idk.

    also attached is the datasheet for the matrix solenoid
    Attached Files
    Last edited by jetenginekyle; 08-15-2023, 08:13 PM.

    Leave a comment:


  • Jordan
    replied
    Originally posted by Ecapnation
    Get an lcd board.... All you need. The Timmy board isn't much of an upgrade
    Is the button configuration the same, compared to the LED board? I seem to recall a couple of buttons in a different position than a stock Gun12 board.

    Leave a comment:


  • Jordan
    replied
    Originally posted by jetenginekyle

    The timmy manual I found online references a different board then the one I have. That one apparently can go up to 50ms of dwell, mine only goes to 16.5ms so it won't work or would work poorly.
    Yeah, I've run into that myself a few times... stock boards can be tough to make functional in non-stock applications.

    Leave a comment:


  • jetenginekyle
    replied
    Originally posted by Jordan

    And, dwell - spoolies and poppets have very different dwell requirements, generally speaking. How much range/adjustment does your Timmy board have?

    Do you have a spare Timmy harness?
    The timmy manual I found online references a different board then the one I have. That one apparently can go up to 50ms of dwell, mine only goes to 16.5ms so it won't work or would work poorly.


    I don't have a harness but I do have wire, a soldering iron, and connectors that i can make work. Not that it matters now tho.

    Leave a comment:


  • Ecapnation
    commented on 's reply
    Yeah but as someone whom worked for Gen E back in the day... The harnesses are very different and a free board that needs said harness to work is going to end up costing him more.

  • Jordan
    replied
    Voltage, and more importantly, amperage/wattage supplied to the noid... some solenoids have a pretty large power consumption when cycling.

    And, dwell - spoolies and poppets have very different dwell requirements, generally speaking. How much range/adjustment does your Timmy board have?

    Do you have a spare Timmy harness?

    Leave a comment:


  • Riot
    replied
    Guys, if he has the board on hand and it’s free and he wants to know if it’ll work…

    …then suggesting other board options isn’t really an answer.

    No disrespect, but that’s Facebook vibes.


    Unfortunately, I also can’t answer OP’s question, I just don’t want to see his thread get derailed, we’re supposed to be the knowledgeable paintball spot on the internet.

    Leave a comment:


  • Ecapnation
    replied
    Get an lcd board.... All you need. The Timmy board isn't much of an upgrade

    Leave a comment:


  • jetenginekyle
    commented on 's reply
    I have the gun 12 chip currently. My goal is to make it easier to tune the dwell, the added firing modes are a nice plus as well. And I already have the Timmy board on hand so its "free"

    I also have a spare set of break beam eyes from a proto rail that should work with the Timmy board. So if I want I could mod my breach in the future to add eyes
Working...