I have one of the less common VSC Phantoms that don't have an adapter in the vertical ASA. So it basically is only made for 12 gram use, unless you swapped the vert ASA or did away with the VSC set up and ran hose from bottomline ASA to valve. But I don't want to do that!
Considering a dummy 12 gram off eBay. Slapping a straight macro fitting on the bottom port and dropping it in the bucket changer.
How well do these things work with HPA and tightened against the puncture pin and seal?
Considering a dummy 12 gram off eBay. Slapping a straight macro fitting on the bottom port and dropping it in the bucket changer.
How well do these things work with HPA and tightened against the puncture pin and seal?
Comment