Cocker frame and grip screw size

[Psycho91]

What are the sizes for the frame and grips screws on a cocker, specifically for a slider frame

[BrickHaus]

It varies. And I'm not 100% on length, but I'll try.


For the most part, the frame to body are 10-32x 1/2" button head.

I wanna say 10/32x 1/2 - 5/8 long. For the asa. That being said it may be buttons, may be flat heads depending on the asa.

Grips should be 8/32 x 3/8 but frames are tapped 6/32 for grips in some cases.

[Grendel]

Follow Link to the Threads Thread - https://www.mcarterbrown.com/forum/p...hread-s-thread

[superman]

most frame mounting screws are 10-32 x 1/2" and 10-32 x 3/8". Button head stainless.

set screws are typically a mix of 8-32 or 10-32 set screws with either brass, nylon or stainless flat tops.

grip screws are typically 6-32, 8-32 or 10-32 for some of the dye frames.