Pinokio/Hk army sonic flex sensor replacement.

[TKcustoms]

My Sonic stopped feeding and I've narrowed it down to the flex sensor.

Currently waiting on hk support to reply in the next day or two.While I wait, are there generic flex sensors that will work? I've done some research and only came up with sensors that are too long.

[TKcustoms]

I've done some more digging and found the company that makes these sensors.

https://flexpoint.com/product/bend-sensor/

Hk/pinokio/tippmann uses the 1" standard solder tabbed non laminated version. Hk also trims the sensor back so balls do not jam.

It seems like if paint is left on the sensor it will eat the trace away.

The polyester laminate may protect the sensor from failing but it makes the sensor more stiff causing feeding issues in certain situations.

Currently i replaced my sensor with a laminated one that i trimmed back quite a bit. The last ball in the hopper gets stuck unless it is given a light shake.