instagram takipci satin al - instagram takipci satin al mobil odeme - takipci satin al

bahis siteleri - deneme bonusu - casino siteleri

bahis siteleri - kacak bahis - canli bahis

goldenbahis - makrobet - cepbahis

cratosslot - cratosslot giris - cratosslot

Announcement

Collapse
No announcement yet.

GOG eNMEy chuffing, wont fire?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GOG eNMEy chuffing, wont fire?

    I'm working on a rental eNMEy for my local field. When I pull the trigger I get a light chuff sound, but the bolt isn't cycling. I've already gone through and replaced all the orings on the bolt. The regulator is holding steady at 180PSI. I replaced the oring inside the solenoid. The rocket is moving freely inside the frame. Everything is properly greased. Tank is full.

    Any ideas? Google hasn't been much help.

    #2
    Is it by chance plumbed backwards? So the valve is cutting air off from the rear?
    https://www.mcarterbrown.com/forum/b...khaus-feedback

    Comment


    • PumpMan10988

      PumpMan10988

      commented
      Editing a comment
      The arrangement of the air fittings only allows you to install the solenoid in the proper orientation. I haven't changed anything related to the air lines.

    • BrickHaus

      BrickHaus

      commented
      Editing a comment
      Does it cycle with the grip frame removed? My next suspect would be a hose kicking on assembly.

    #3
    Is the tip still on the trigger rocket, they can break off if not assembled right

    Comment


      #4
      I'm 99% sure this solenoid is just dead. It's doing the same thing with the grip frame off, and the rocket tip is still intact. GOG seems to have shut down, so the field owner isn't very concerned about fixing this one. Most of his rentals are emeks anyway.

      Comment


        #5
        If he wants to fix it I think new ones can be had for like $30 or it might be $50 I'm not %100 sure

        Comment


          #6
          I would just drop a clippard SMAV-3 in there and toss the solenoid. I absolutely hate how mushy the trigger is on eNMEys anyway. If you set the bracket right the trigger will be crisp, short, and light.

          Comment

          Working...
          X