So I'm trying to get my old Diablo Wrath back up and working. I bought what might be the last new R15 Ramping board from ANS. The board seems to be working fine but I'm having a hell of time wiring up new eyes. I found someone on reddit who did the same as me and bought the IR sensor/receiver he used.
https://www.digikey.com/en/products/...R-4206E/121710
https://www.digikey.com/en/products/...R-4206E/121710
https://www.digikey.com/en/products/.../4714/13175532
And the last one I used to connect to the board.
Even with no eyes installed and the eyes on the gun still fires. The IR port on the board puts out 12.5mv and the receiver port puts out 750mv. This is roughly the same when measured at the eye/receiver itself.
So I'm just sort of lost at this point haha.
This had an old T-Board in it and the directions on how to change anything on that have been lost to time. Along with everyone hated changing things when I got it in 2006 lol.
https://www.digikey.com/en/products/...R-4206E/121710
https://www.digikey.com/en/products/...R-4206E/121710
https://www.digikey.com/en/products/.../4714/13175532
And the last one I used to connect to the board.
Even with no eyes installed and the eyes on the gun still fires. The IR port on the board puts out 12.5mv and the receiver port puts out 750mv. This is roughly the same when measured at the eye/receiver itself.
So I'm just sort of lost at this point haha.
This had an old T-Board in it and the directions on how to change anything on that have been lost to time. Along with everyone hated changing things when I got it in 2006 lol.
Comment