Jack Hammer LPR

[Snowpuff]

Hey guys I don't know much about auto cockers but if the lpr is backed all the way out should it not send any air at all?

I have it back all the way out but it still blast ait through .... i just bought this from a guy off face book im woundering if i got scammed again or if im jus an idiot who dosnt know how to operate it .

Thanks.

[Snowpuff]

Also he sold Me a worr blade soleniod and it's blasting air through the vent , not sure if thats because the lpr is too high or if the noid is also broken .......

[Ecapnation]

I don't recall if those zero out.... But is the air coming out of the barb or front?

[Snowpuff]

Barb I want little air to come out or none but it blast out and if I back it out all the way then it blast out that little hole

[Snowpuff]

Any one?

[Jordan]

Sounds like it needs a rebuild... your reg seat is probably jello.

Backing the knob off should eventually shut the LPR off. Your solenoid is likely over-pressurizing and venting to try to stay in one piece instead of blowing up.

[Snowpuff]

Ya that's what I thought, it should be able to shut it off if backed all the way out... well I'm pretty sure I just got scamed for a broken lpr and broken noid

[Ecapnation]

Ans lprs are pretty easy to fix. I would rebuild it regardless.

[Jordan]

I think you got a 20 year old LPR, not scammed.

The noid is likely fine - they have a safety vent that prevents over-pressurizing in the event of a pressure spike. You might need to reseat the gasket inside the manifold, or replace it.

Again, those noids are 20 years old. I guess it's possible someone decided to scam you for a few bucks, but these parts are OLD. Shit happens.



Check the orings - red - and the reg seat - yellow.



Rebuild video if you're not sure how they come apart:

https://youtu.be/78jkI6YNYhE?si=yioS2yH_DP1GjNnt

[Ecapnation]

I do find it funny that ans makes the worst rams and the best lpr's in user serviceability

[Snowpuff]

Thanks man!

[Snowpuff]

Yup that did the trick, all the orings had massive chips in it , also its supppose to have 4 set screws mine only had 2 .. thanks bro