how far does a 12 gram need to be pushed onto a pierce pin to activate/puncture?
Announcement
Collapse
No announcement yet.
12gram puncture question
Collapse
X
-
Most cartridges i take out of my Phantom are about 1/16" holes in the face. Figure no farther than that is needed.
The cheap drop out changers from ANS ("Warrior") have a conical pin and no seal, assuming the cart face seals to the pin. Old Nellys were like that too. Phantom pierces are cut at an angle so you want to have that elastomer.Feedback
www.PhrameworkDesigns.com < Nelspot sears and triggers back in stock! Also Sterling feeds, Empire feedneck adapters, and some upcoming projects.
Comment
-
I bought one of those cheap ones just to try and to see what one of my markers got off a 12 gram. It leaked no matter how hard I tightened it. Sent a video to ANS. Got my money back, and they didn’t want the changer back. Dropped a couple 008 or 009 o-rings in there, and it seals fine. I think the 009s self-retain, so long as you don’t bleed too much gas too quickly. It’s in my box of forgotten/giveaway parts.
-
Comment