Pre2k Angled Inline Regulator Front Block Interference?

[RyanBsox]

Awesome, yes I saw that on their website too. Can I ask why you didn't like the angle? I have never played with one, but I could imagine my hand sliding up towards the body.

[Buff_phroggie]

ANS has them in strait and 15⁰ for $15. https://ansgear.com/ans-autococker-c...er-dust-black/

I just took a red 15⁰ off my gx-5 because I hate the angle.

[superman]

I am pretty sure i have some angled vert asas.

[Ecapnation]

It won't hit your front block.

There's 15° asa's out there for pre2ks but generally those are $40-50

[RyanBsox]

I've been working on getting my ANS Gen-X Autococker up and running, and I wanted to improve the appearance of the macroline from the ASA to the inline regulator. I tend to stick to a budget and look for affordable alternatives whenever possible. Originally, I used a makeshift 45-degree fitting on the inline regulator, combining a standard straight push fitting with a 45 NPT adapter, but it just didn’t have the right look.

I know Docfire offers those Camozzi 45 fittings, but at $40 after shipping, it's hard for me to justify the cost, especially when the entire gun is made up of inexpensive eBay parts that I’ve restored. A much cheaper alternative would be a 15-degree vertical ASA adapter, but I’ve never seen one used on a pre-2K Autococker before. Are these compatible or will it hit my front block?

Thanks for the help.