Best Home Compressors for filling HPA tanks?

[Dalep_rc]

I'm not an expert, but I have used this for home used for about 2 months now. Not really a long term review, but its not broken yet. There is quite a bit of condensation that does come out of it, even when using the "moisture separator". I usually fill a tank up to about 4k and let it cool for 20 minutes before filling another.

https://www.amazon.com/gp/product/B07XYRS15R/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Hope that helps you out.

[KMDPB]

Yeah that's the cheaper one theres also a version with auto shut off. You should run a dryer but it's not completely necessary. We fill 2 scubas each time we play and take those out to the field to fill off of. Takes maybe 25 minutes to fill a scuba. I run a Facebook group called yong heng compressor owners group. Lots of good info in there. They are very common with the air gun guys.

Sent from my SM-N950U using Tapatalk

[WORR13]

yeah, sadly looks like best option is yong heng unless u wanna spend $5k+ on a scuba compressor. think im gunna order one and a good oil/water separator

[maninblack2k]

I'm still looking at the UmareX or the Benjamin Traveler 2. More expensive but self contained and they seem to be well reviewed.

[Cunha]

Now what are some good dryers / moisture removing pieces that can be paired with these cheap compressors?

[KMDPB]

Now what are some good dryers / moisture removing pieces that can be paired with these cheap compressors?

You run the intake through a PVC pipe filled with reusable desiccant. Then you run a larger output filter with cotton filters and charcoal. The output filters can be purchased on sites like alibaba/aliexpress, they must be rated for high pressure. The input filter doesn't have to hold pressure so it can be homemade simply.

[superman]

I have been looking deeper in to this myself. I ended up with one of the msc-6 compressors with a blown motor. have a new motor to replace it, but of course its a 3 phase motor so that is fun.


I loved my shoebox, i just ended up fighting the bushing support rod. probably just an alignment thing. If anyone is interested in an f10 shoebox id be willing to let it go.