Life is what it is, so I have a few markers that have mostly been wall hangers that need to go to help get my kids into vehicles for college. Problem is, as custom and rare as much of this is, I have no idea what an appropriate price is.
AO and Facebook AGD group have also had trouble assigning value, so I come to MCB! (first post since the reset, but I go back a ways)
Custom z-mag
Luke's z-frame, first set of these hex panels (the only ones without Luke's logo), Luke's wave rail, xmt hex body, v2 VD foregrip, retro valve, WWA Veritas barrel.
The fore grip is milled down and beveled to match the body and drilled and tapped to mount to an aluminum block. The front of the rail is also milled to allow the block to pass through and mount to the foregrip slot.
Pneumatic intelliframe
Custom p68sc
For the brass folks - p68sc with original parts, ccm frame milled and modded to fit, custom aluminum "co2 cartridge" drilled and tapped for a macro fitting through the lower tube, apocalypse (springpheed) designed gen 3-style feed gate, top tube milled for the follower, and main tube drilled and tapped for Spyder detents
Gas-thru springpheed phantom
Phantom with c-bored barrel, mid-length pump handle, and rtr frame milled for gas-thru microline. Valve driilled and tapped for micro fitting, body slotted for micro fitting. New, metal springpheed (wish apocalypse were still going...)
AO and Facebook AGD group have also had trouble assigning value, so I come to MCB! (first post since the reset, but I go back a ways)
Custom z-mag
Luke's z-frame, first set of these hex panels (the only ones without Luke's logo), Luke's wave rail, xmt hex body, v2 VD foregrip, retro valve, WWA Veritas barrel.
The fore grip is milled down and beveled to match the body and drilled and tapped to mount to an aluminum block. The front of the rail is also milled to allow the block to pass through and mount to the foregrip slot.
Pneumatic intelliframe
Custom p68sc
For the brass folks - p68sc with original parts, ccm frame milled and modded to fit, custom aluminum "co2 cartridge" drilled and tapped for a macro fitting through the lower tube, apocalypse (springpheed) designed gen 3-style feed gate, top tube milled for the follower, and main tube drilled and tapped for Spyder detents
Gas-thru springpheed phantom
Phantom with c-bored barrel, mid-length pump handle, and rtr frame milled for gas-thru microline. Valve driilled and tapped for micro fitting, body slotted for micro fitting. New, metal springpheed (wish apocalypse were still going...)
Comment