Later black VM68 body and parts, could be used to make a Magnum or EXC clone. Decent condition, has wear under some screws, around edges and where the a clamp on sight rail sat. The previous owner milled down the clamp on dovetail sight rail and drilled and tapped the body for it. The holes are decently centred/square but there is one previous attempt that was off (pic 4). The body also has the later style enlarged air passage and valve chamber to make it more HPA friendly.
Ideally I'd like to trade for a similar condition black and silver striped VM body also with an enlarged valve chamber. Can meet at Wasaga or potential MCB meet ups.
Also available are a grip mounting block that was rethreaded to 1/4-20 NC and someone's homebrew 4.5" barrel (mostly raw, looks like it was turned from an Equalizer or bull barrel). Both free if interested.
Sent from my Pixel 4a using Tapatalk
Ideally I'd like to trade for a similar condition black and silver striped VM body also with an enlarged valve chamber. Can meet at Wasaga or potential MCB meet ups.
Also available are a grip mounting block that was rethreaded to 1/4-20 NC and someone's homebrew 4.5" barrel (mostly raw, looks like it was turned from an Equalizer or bull barrel). Both free if interested.
Sent from my Pixel 4a using Tapatalk