OK, so it sounds like the macroline is leaking at the air inlet. I clipped the line, fresh razor, and made sure the fitting was tight into the Air Valve. I changed the macroline elbow as well, all had the same little "hiss".
I went so far as to flip the fittings, from the asa, to the air valve...and low and behold, the fitting that leaked at the Air Valve doesn't leak on the asa, and the one that didn't leak on the asa is now hissing at the Air Valve.
Bleh.
I guess my question is, is there something else that could be sounding like this, like it's inside the valve? I did get the AGD rebuild kit and changed out the orings.
**Update**
It was the on/off. I realized there is an RT on/off in my classic valve, and changing the little oring inside and the one around the neck of it sealed it up perfectly.
Now I can sleep tonight.
I went so far as to flip the fittings, from the asa, to the air valve...and low and behold, the fitting that leaked at the Air Valve doesn't leak on the asa, and the one that didn't leak on the asa is now hissing at the Air Valve.
Bleh.
I guess my question is, is there something else that could be sounding like this, like it's inside the valve? I did get the AGD rebuild kit and changed out the orings.
**Update**
It was the on/off. I realized there is an RT on/off in my classic valve, and changing the little oring inside and the one around the neck of it sealed it up perfectly.
Now I can sleep tonight.
Comment