Announcement

Collapse
No announcement yet.

Source for bolt push pins, or alternatives?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Source for bolt push pins, or alternatives?

    Howdy,

    Two of my Cockers have detents in the bolt for pull pins. The other has a nice bolt, but it's the older style sans detent inside and using a push pin with the tiny ball bearings.

    1) Where can I get another push pin? The one I have is already missing a bearing.

    2) Short of threading the bolt for a ball bearing set screw or a zip tie, has anyone come up with other options for keeping the bolt attached to the back block?
    “It is no measure of health to be well adjusted to a profoundly sick society.” -Krishnamurti
    Tags: None
    #2
    A-5 Push pins will work. They can mark up your back block if you're not careful though.
    Cuda's Feedback

    Comment

    • lew
      #2.1
      lew commented
      07-03-2022, 08:28 PM
      Editing a comment
      Looks like a take down pin for a G3 rifle. The wheels in my mind are turning...
    #3
    I have a spare old style pin. If I can find it you can have it.
    I think Hellion360 was selling pins with o rings that wouls stay in on their own
    • Likes 2

    Comment

    • lew
      #3.1
      lew commented
      07-03-2022, 08:12 PM
      Editing a comment
      I'll do some digging on Hellion's pins. Yes, if you have a spare push pin, send me a PM. Cheers!
    #4
    Didn’t Doc just make a bunch.

    Autococker parts has Delrin ones.

    https://autocockerparts.com/autocock...olt-pin-black/

    Comment

    • lew
      #4.1
      lew commented
      07-03-2022, 08:16 PM
      Editing a comment
      Those are pull pins, for bolts with a detent (ball bearing set screw threaded into the back) integral to said bolt. Push pins have a button plunger on one end and ball bearings on the other. The bolt lacks any retention mechanism.
    • Chuck E Ducky
      #4.2

      Chuck E Ducky

       commented
      07-03-2022, 10:17 PM
      Editing a comment
      Oh your looking for that big pin they put in the older cockers. I might have one in the parts box.
    • lew
      #4.3
      lew commented
      07-04-2022, 12:31 PM
      Editing a comment
      Cool. I'd appreciate you looking. Cheers!
    #5
    https://www.mcarterbrown.com/forum/b...yle#post225634

    I have just a few of these left if you do want one.
    Need Inception Designs or Shocktech Products? Let me know!

    MCB Feedback

    old PBN feedback
    • Likes 2

    Comment

      #6
      Originally posted by Hellion360 View Post
      https://www.mcarterbrown.com/forum/b...yle#post225634

      I have just a few of these left if you do want one.
      PM inbound.
      “It is no measure of health to be well adjusted to a profoundly sick society.” -Krishnamurti

      Comment

        #7
        McMaster.com has them I think.
        probably need to measure your current one, sort and find the replacement.
        • Likes 1

        Comment

        • lew
          #7.1
          lew commented
          07-04-2022, 12:12 AM
          Editing a comment
          I'll look and see what they have. Thanks!
        #8
        https://www.pbsports.com/products/in...ocker-push-pin

        https://docsshop.storenvy.com/collec...-nail-pull-pin


        "When you are asked if you can do a job, tell 'em, 'Certainly I can!' Then get busy and find out how to do it." - Theodore Roosevelt

        Feedback Link - https://www.mcarterbrown.com/forum/b...del-s-feedback

        Comment

          #9
          McMaster should have something you can use. We use much longer ones in the factory for different things.
          Feedback

          Comment

          • lew
            #9.1
            lew commented
            07-08-2022, 11:01 AM
            Editing a comment
            I have a couple on the way, but I like digging through McMaster's site for funzies. Thanks!
        Previous template Next
        Working...
        X