Orracle Macroline Orientation

[cmar2525]

Looking for advice - don’t like how the air fitting feels on my orracle. Would like to seat it like in picture B. Thought maybe an oring or rubber washer (suggested by r/autocockers101) would help keep it in place (above reg in pic A) Anyone have any luck with something like this?

also - any links to 45° fittings? I know docfire had some on his site but it’s down for Supergame. He also did an awesome job tuning up this marker; highly recommend. Thanks all!

[latches109]

fit a 112 oring on the top of the reg

[Grendel]

Yes, 45 Slip Fit Pneumatic air fittings exist which would improve your bend and how it enters the fitting. You could also by some Aluminum or Stainless hardline and custom fit a hardline (which is what I would do).

As latches109 said an o-ring works or a rubber washer as you have already been told. I have a bunch of nylon washer/spacers that I have for other things that I just find the right thickness to get it almost to where I want then have to "force" the final little bit so it does not move.

[Psycho91]

An oring at the top of the reg should give you a little wiggle room, you can also place it inside the VASA as well

[minimag03]

As Psycho91 mentioned, you could possibly place a 014 or 015 oring on top of your regulator that prevent it from screwing all the way in. If you want more elegant solution, I imagine Ninja Paintball's adjustment clips might wok on your reg They're meant t obe be used on tank regulators but I dont't see why they wouldn't also work on your inline regulator.

[Jordan]

You can always leave it a bit loose - as long as the top oring is against the sealing surface you'll be ok, air pressure will "lock" it in place when aired up.