I have finally have a project that I can post about that is complete or very close to completion.
Many years ago I had a gentleman who's name has been lost to history for me (I want to say Dale but that may be way wrong) he minied, reversed, and half block a WGP autococker, marker. I received that marker in 900 pieces since the plan was to have it annoed and he would put it back together.
Well about that time 2010ish i got it back I moved away from San Diego so it remained in 900 pieces for many years.
2021 rolled around and I got back into paintball and Jake superman was kind enough to put it back together for me.
He did some more work and unfortunately I do not have a before and after for him just the precut and after cut.
I updated the trigger from a stock WGP to a dye frame and got it working. I will let him describe the work he did since it was A LOT.
I used the marker in its current configuration for a year or more to make sure I would use it and make sure I liked it and after that time I decided that I wanted to have it finished.
While I was at Supergame I talked to Mozak Machine and he agreed to do the work for me he cleaned it up added some flare to it and made it unique.
From there it went to Ruckas Anodizing and I gave him very strict guidelines it had to be polished, and have green and purple in the anodizing.
He knocked it out of the park.
Chad Kimbirk with Chad's Complete Tech Services put it together and is tuning it and finishing the last little bit off.
It will soon be headed my way where I can love it and play with it and call it George!
Many years ago I had a gentleman who's name has been lost to history for me (I want to say Dale but that may be way wrong) he minied, reversed, and half block a WGP autococker, marker. I received that marker in 900 pieces since the plan was to have it annoed and he would put it back together.
Well about that time 2010ish i got it back I moved away from San Diego so it remained in 900 pieces for many years.
2021 rolled around and I got back into paintball and Jake superman was kind enough to put it back together for me.
He did some more work and unfortunately I do not have a before and after for him just the precut and after cut.
I updated the trigger from a stock WGP to a dye frame and got it working. I will let him describe the work he did since it was A LOT.
I used the marker in its current configuration for a year or more to make sure I would use it and make sure I liked it and after that time I decided that I wanted to have it finished.
While I was at Supergame I talked to Mozak Machine and he agreed to do the work for me he cleaned it up added some flare to it and made it unique.
From there it went to Ruckas Anodizing and I gave him very strict guidelines it had to be polished, and have green and purple in the anodizing.
He knocked it out of the park.
Chad Kimbirk with Chad's Complete Tech Services put it together and is tuning it and finishing the last little bit off.
It will soon be headed my way where I can love it and play with it and call it George!
Comment