Ultimate Brass eagle raptor thread.

[wthomas333]

I saw this for sale on eBay and just kinda looked past it for nearly a week. Then I just happened to take a closer look. So I picked up the whole lot for $5 plus shipping. Might not have the early green body, but I will have some of the green plugs at least. Might just try them on the Cabelas Raptor to see how they look.

5359E0AF-3F37-473C-9959-AB17BBFFF82F.jpeg

[scottieb]

Oh man, that's an amazing deal!

[pdang]

I just got one with a bundle deal for less than $80.

has anyone thought about turning one into a pump? It would work perfect being slot on both sides to add a pump arm. Also mill down the feed need and add a10R tube!?!?!

Do you guys know of any trigger frames or internals that can be swapped?

#51680


Screen Shot 2023-01-17 at 3.40.53 AM.png




Okay okay..l Just follow with me for a bit..


IMG_5570.jpeg ] IMG_5567.jpeg IMG_5559.jpeg IMG_5563.jpeg IMG_5574.jpeg IMG_5577.jpg IMG_5577.jpeg IMG_5564.jpeg IMG_5576.jpeg IMG_5570.jpeg

[Brokeass_baller]

I dig it. Looks VM68-y.

[Twisted G]

pdang the raptor looks great as a pump. You should do any of these mock ups. Most STBB markers make great pumps. Azodin proved it for sure. I personaly like the look of the pump arm wrapped around the barrel myself. Reminds me of my sterling pump which I love and also has a silver ano. .

[wthomas333]

Just an FYI, If you are looking for a replacement Raptor main spring, I just figured out that a Tiberius T15 main spring is the same diameter while being slightly longer and stiffer than the stock Raptor main spring.

After a very brief test in 40 degree temps with an HPA tank putting out about 750psi, I took out the spacer and backed out the velocity adjuster so it was flush with the rear plug and was shooting between 300-310 fps.

[Brokeass_baller]

Oh nice. I bet that'll work in my F2, too.

[JohnWayne]

Has anyone swapped the Raptor valve out with a modified Autococker valve?

[dartamon]

No, never heard of that before.

[justwantstopaint]

has anyone cut the angled feed tube and convert one of these to a vertical feed? or feed it with a tube?

[dartamon]

I own a vert feed Raptor - it is a one-of-a-kind prototype from BE. There have been tube conversions. Frankly, I'd rather have a side feed, like a cocker.