Spare Parts List for Buzzard and Comp

[Fantom919]

Wondering if anyone had list of o rings for buzzard and comps? It should be the same as standard Nelsons i believe but I can't for the life of me find them anywhere.

I believe the bolt oring is a 110 n70 and the 12 gram seal is a 00 washer.

Also where can you get a pump return spring? I recall someone saying they used a sprinkler head spring a long time ago.

Thanks and I can update this post to compile the info if we can gather it together.

[Sale2me]

Recalled using Rain Bird pop-up sprinkler, 1" diameter.

[Hellion360]

You will want the low water pressure spring for a lighter pump stroke.

[Fantom919]

Recalled using Rain Bird pop-up sprinkler, 1" diameter.

Do you remember which model? I found some 2 inch sprinklers at home depot but the spring seems pretty stiff.

I haven't had any luck looking for the low pressure sprinklers either unfortunately.

[BOOSH!]

All the o-rings were standard Nelson size. Those parts were available everywhere, so there was no need to re-invent the wheel. The seal/puncture on the 12gram is the same you would find on a Nelson gun as well.

TBH a lot of stuff was put on the guns because that what was laying around the shop. So sometimes you would end up with a bolt o-ring that was a little too big. In that case you took it over to the pollisher/grinder and simply made the o-ring smaller once it was put on the bolt by grinding it down; this happened more than once.

I don't know about the spring - I didn't like those things so I never bothered to find out where they came from. I always assumed Earon had a "spring guy" in LA somewhere - he had a place for damn near everything.