T2 (and others) on 12 grams

[iamthelazerviking]

I've seen pictures of T2's outfitted for 12 gram use, and recall people yielding a good amount of shots per 12ie and not doing much aside from attaching a bucket changer and utilizing the CCM reg and lowers.

Curious if there's much else you need to do when running a CCM marker with 12 grams.

[Chuck E Ducky]

Nope.

Expect 30 shots on a hot day give or take just throwing something on the ASA.

CCM dose not recommend using Co2 I’m assuming due to the plastic reg pieces. I purchased new reg internals 6 years ago and have yet had to change them out. People say you can’t run Co2 on them. I have never been given a reason why. Mine and every other CCM I have tried works fantastic on HPA or 12g. However I have never tried using an actual bulk Co2 tank (never seen the need for it). I do only run food grade 12g (no oil) I recommend this. Them Crossman can really gum stuff up if you don’t clean stuff regularly.

[XEMON]

It's not a TW2, but I have put hundreds of 12g through SSR ant it shoot as the day I got it .... Don't see why other CCM should be any different ...
I get a solid 35 shot per 12g at 295fps with a good barrel (FSR)

[BLachance75]

Over the past few years I’ve put well over 100 12 gr through my S6. I routinely will switch from using hpa to 12 gr and the only thing I do is adjust the velocity. It is usually about a 20 FPS difference between the 2

[Tracker]

this one was me, i remember i was able to get a couple shots over 40 before it wasnt worth it. (unless it was 30 which lines up with everyone else, but i think i was able to use 40 between reloads consistently.. it was awhile ago)

[Chuck E Ducky]

This marker is why I built my J6 into a SC marker. Everyone was like you can’t do that. Your like oh yeah hold my Beer.

[Tracker]

i have missed the SC setup enough to stash a SC feed tube for my current T2, but ill need another cart reg, and want to try a T2W stock next time.. some day.. some day

[Lawn]

I was able to get 35-40 on my S5 when I ran lever changer and used Lelands, I ran a baby hopper with it and wasn't stock class for the feed. I think I tried on my 6.5 and was getting 30ish, but now excited to put a one piece feed on the ss25 and excited to go full stock class for that one!

Speaking of which, does anyone know what size threads are for the CCM screws that mount the feedneck to the body. I was thinking 4-40 but I haven't been able to confirm/find info on web yet and just got back from Home Depot and they had 6-32 which was wayyyy too big.

Thanks! Will post the ss25 with feed on it as soon as it's all ready

[iamthelazerviking]

Looking at those same screws right now...might be 4-40 but might be best to call or email CCM to be sure

[Menso]

Just checked my SS-25, they’re 6-32 x 3/8