T2 Stock Feed availability?

[flyweightnate]

So, a question first... then an opportunity?

I'm using a T2 top tube to speed up the build-out of a custom Sterling. It's pretty helpful considering my garage lathe can't handle barrel threads. But, I want to shoot stock class occasionally.

What's the availability of T2 stock feeds? Can anyone point me to something reasonable?

And, because this is how I think, if I need to make a T2 stock feed, would others buy them? I sketched one out yesterday and the shop I use is quoting around $100 each if I can get a big batch of them done (dozens), or I can 3D print if it's just for me. Something in polymer would take a Phantom tube or cram n jam with a CCI-style taper fit, or I think I could get a gland designed for an aluminum tube to hold a Phantom tube (or maybe even cram n jam) with an -020 o-ring. Alternately, I could figure out how to do the Shapeways thing if people just want to print their own. (I've never done that before.)

It would be rock-back only, since the Sterling doesn't have a bolt pin to contend with, and I don't know the height of a T2 bolt pin.

Your thoughts?

[BrickHaus]

I'd likely buy one. You just gotta catch me before I buy a gun I don't need when you do it. I'd also buy a printed one. But yeah, I got a t2 and I'd like a stick feed on it.

[El Gringo]

stockclasshero made some 3d printed ones

[BrickHaus]

Just for reference. I personally Pmd stockclass hero a few months ago when Jonny Dread directed me his way. I've yet to get a reply.

Edit: just kidding. I was sent towards a different member for his carbon fiber feeds. And no reply.

That being said the 3d printed options are out there from 2other members.

[Chuck E Ducky]

There is a printed version a member already makes https://www.mcarterbrown.com/forum/b...nd-cram-n-jams

But if you make aluminum ones I would be down for one.

CCM cram and jam is going to set you back 150+ I see
eBay idiots paying way more than that.

If you’re going to make them you should make this style. This is two different CCM feeds put together. I world take two of these. 1st Gen T2 cram and jam feed block w/ and SS-25 SC Aluminum feed tube threaded into the T2 feed block. I had to buy two over priced feeds to make this.

It’s pretty simple just a parabolic ramp and the screws are T slotted from the back so you put the screws in the feed neck loose slide the feed block on and tighten it from the top threw a key hole. Screws are hidden and it flows really nice with a lot of different designs. I would love to get one for my Phantom.

[flyweightnate]

Oh, I might just have to buy one of his in the meantime... those printed C&Js look like what I actually need, functionally. Although long term I always like aluminum.

That feedblock is a great look on your gun, but honestly, not my aesthetic for the more utilitarian body milling. And I don't think I could conceptualize anything nearly as attractive.

[SniperPedik]

i am not a big fan of 3d printing in paintball, especially on game critical parts that snap halfway through said game lol

[Chuck E Ducky]

They actually hold up really well. Price wise you can beat 3D Printing.

[SniperPedik]

I'm sure they hold up well, but knowing my luck something will break when I really don't need it to lol

[BrickHaus]

Circling back on this. If we manage to get an aluminum order going.

I assume these will be 100 each manufactured and shipped to you. This would also be raw finish. And an additional shipping charge to go from. You to us?

Either way, I'd be in likely.

[flyweightnate]

Circling back on this. If we manage to get an aluminum order going.

I assume these will be 100 each manufactured and shipped to you. This would also be raw finish. And an additional shipping charge to go from. You to us?

Either way, I'd be in likely.

Yes, raw (and tumbled with media if they'll fit in my rather small unit), but I have a decent industrial anodizer nearby for black or clear. They're around $75 per batch, so if there's enough interest it can work out to be a good price. However, if you're trying to match a high-gloss polish and bright dip, I'd suggest raw.

I'll be forthright and let you know I intend to come out a little bit ahead on this - even just enough that I don't have to pay for my own feed, as it is - but yes, $100 would be my target price, not cost. I get enough people on board I can drive that lower, but I don't know that a few dozen people are jonesing for a feed and there's always a risk I'm left holding the bag if too many people back out.

Do any Spyders take the same bolt patterns? I wonder if there's demand for the Spump guys... all two of 'em.

[iamthelazerviking]

If you're on Facebook the CCM BST and Pump/Mech group would definitely have interest

[Chuck E Ducky]

Yes Spyders CCM and CCI all take the same dimension feeds. CCI just uses one mount screw and the curved surface to lock it in place. The difference between the CCM and CCI is the clearance needed for the bolt pin on the half block markers. You can take a standard full block CCM and bolt a CCI feed directly on with the right length screw. But on say a T2, S6.5 the bolt pin will not clear the bottom of the feed tube. You can make a low profile bolt pin but you will have to remove the feed to clean the top tube every time.

[flyweightnate]

I was going to use a CCI feed, but the hole spacing is off by juuuust enough and they're not slotted like the CCM. Sold my E99 long enough ago I didn't have it for reference anymore.