DSR+ FF Trix Mech Issue

[pdogg77]

I just got a FreeFlow Dark Trix in with a Mech frame. It works fine with the electro frame but when I swapped in the mech frame I can't get it to cycle. It just hisses when I pull the trigger. I've played with the trigger travel screws etc and I can get it to "not hiss" if I adjust the post travel so it isn't hitting the valve pin but I can't get it to actual fire cycle no matter what I do. When I air it up I hear the blot lock etc. Any wizards out there have ideas?

Here's a vid of what happens...

https://www.youtube.com/shorts/8sQPsrhnYZ8

[Daltech]

Did you put the Im PRO three way solenoid rod into the mech frame? Check the solenoid rod and make sure it moves back and forth and that you don’t have the electronic solenoid rod in the mech solenoid.

[pdogg77]

Good support from FreeFlow. He's going to take it back and take a look at it.