LV1.6 stock LPR pressure

[iamthelazerviking]

Got a wild hair and now have a nice used LV1.6 on the way. Been a spool user for so long and wanted to change things up.

Since don't have a pressure tester for the LV platform and don't want to buy one, curious what stock pressure of the LPR is when reset to the factory position based on what the manual suggests.

[Chuck E Ducky]

With the 1/8th hex key turn the LPR adjuster clock wise until you feel a slight resistance then turn Counter Clockwise one full turn.

You don’t need a tester set it to factory and forget about it.

Also PE has all there manuals digitally available on there main site drop down on the Left> manuals> search

[Chuck E Ducky]

Oh PE don’t even have that in the manual. Not sure I wouldn’t mess with it unless you don’t care about reliability. If there was a better solution it would come set that way from the factory. The 1.6 platform has had extensive testing at this point. They shoot phenomenal out of the box. I wouldn’t mess with it.

[iamthelazerviking]

Chuck E Ducky Yeah I skimmed through the manual, and have read posts about tuning etc, don't have the marker in hand yet but expect to have been messed with and want to just put it back to stock settings then MAYBE make some tweaks from there

[Chuck E Ducky]

Just pull it apart clean it reset all the settings to factory. Use a fresh name brand battery. All the ones I have had to “fix” were dirty, dead battery, or some internet agg settings, messing with perfection. They shoot really good it’s one of my favorite PE platforms. Use a slight over bore let the detents do their job and it will make magic happen.