LV1.6 tuning

[scuzzy]

I just got an lv1.6. played one day and was only disappointed with the efficiency. It was stock settings, heavy ram. I put in the light ram, turned both SFR's all the way up, dwell at 8ms, LPR 1/2 turn out from all the way in, and hpr somewhere around there (both settings around factory settings). With a great bore match, getting 280-290fps consistently. Still a great feeling shot.

Should I be concerned about the LPR or hpr setting. Or just go with what is working? If the HPR is too high, will I see any issues? How do you all estimate pressures without gauges?

[dano_____]

Run it as it is. If it is shooting consistent then don't toy with it. Wipe it down after playing and follow the manuals recommended lube schedule. Taking it apart to 'clean' the whole drive train usually leads to more problems in the long run with egos. Your gun will need quite a few cases ran through it before it is broken in. If you want to find tune at that point you can, but doing anything prior to that won't get you the results you might be expecting.