How Robust are Mini Regs?

[Jordan]

I might give that a try, the manual does say no oil though...

The air I was using was pretty wet (hand pump home fill) so I might try the same with some dry air.

Sent from my Pixel 4a using Tapatalk

I think the main concern is likely about contaminating the solenoid... but pressure spikes are worse for the noid in my opinion, so I'm ok with removing the noid and cleaning any oil out of it once in a while.

[Toestr]

I toss a couple drops of oil in once in a while... seems to help prevent creep.

220psi is a bit high, 200 or lower is where it should be.

I might give that a try, the manual does say no oil though...

The air I was using was pretty wet (hand pump home fill) so I might try the same with some dry air.

Sent from my Pixel 4a using Tapatalk

[Jordan]

So I was able to shoot it today. After about 120 rounds the pressure had crept up to about 220psi. It seemed to shoot fine though.

Sent from my Pixel 4a using Tapatalk

I toss a couple drops of oil in once in a while... seems to help prevent creep.

220psi is a bit high, 200 or lower is where it should be.

[Toestr]

So I was able to shoot it today. After about 120 rounds the pressure had crept up to about 220psi. It seemed to shoot fine though.

Sent from my Pixel 4a using Tapatalk

[Toestr]

Thanks guys, I guess for once I'll have to leave well enough alone. I got the pin depressor/filter out of the ASA, and that's as far as I got. I did try to get the screw under there out, but ended up damaging the head. So that's it.

Sent from my Pixel 4a using Tapatalk

[KMDPB]

I have a relay I bought sold as leaking, I wanted for an hoseless ion. How hard is hard? I haven't dug into it yet.

[Jordan]

The original Mini reg is non-serviceable. The Axe Relay, which can also be fitted to a Mini, is... but service parts are hard to find because Empire doesn't want anyone messing with them.

[Chuck E Ducky]

It’s the transfer tube that leaks on them with that tiny specialty oring. The reg itself is pretty rock solid.

[XEMON]

Took apart mine to to machine it, its not that bad ... some small parts, but nothing too crazy ...

[Axel]

I bought my Mini almost nine years ago and the reg is still fine. I hear they are not serviceable once they do go, however. As stated, the solenoids die young, but at least they are cheap to replace

[XEMON]

Sorry, typo/autocorrect ...

Disable the vent.

[Toestr]

If you disable the cent, they make very capable regs in a super small form factor ...

Forgive my ignorance, but what is a cent?

Sent from my Pixel 4a using Tapatalk

[XEMON]

If you disable the cent, they make very capable regs in a super small form factor ...

PS: Vent not "cent" ...

[Toestr]

That tm15 have an empire relay. Or the stock non on/off reg on it?

It's the stock reg from the original mini.

Sent from my Pixel 4a using Tapatalk

[BrickHaus]

That tm15 have an empire relay. Or the stock non on/off reg on it?