Empire Sniper with Inception pump kit. Can't get the Autotrigger to work..

[Target]

I bought an Empire Sniper that came with an Inception Designs Drift pump kit. It did not come with the Autotrigger cam, arm and screw. I purchased factory Empire parts .
I cannot get the auto trigger to work. Marker will not fire with the cam installed in the frame. It seems that the autotrigger arm points to 11 oclock but needs to be at 10 to allow the trigger to release the sear.

Are the stock Empire parts not compatible with the Drift kit?
Do I need to adjust something?

[Lt. head-shot]

Try adjusting the Hammer lug screw until the gun will fire. Typically when tuning AT kits, you can back that screw off so that the gun will fire (while holding the trigger down) about a 1/16 to 1/8th of an inch before bolt closure. It sounds like it may be adjusted too far the other direction now, not allowing the hammer to drop until it would be past bolt being closed.