Promaster rebuild help meeeeeeee

[Bonjwa]

I was excited to see that ICD is offering o-ring kits for their markers and I'll be picking one up BUT

I am missing screws that hold the clamshell of the gripframe together. This is frighteningly specific. Any idea where I could find something like that? I'm ALSO missing a screw that holds the block that the HPR and LPR screw into.

Really any good resource for how to get this thing back to full health would be greatly appreciated. Guides for teardown and rebuild would be great as well.

Anybody have one of the AKA lprs? No idea why they produce one for this very specific obscure model of marker but i'm here for it and I'm going to have to AKA this one out!

Any advice, help, links are all greatly appreciated.

Cheers!

[Jordan]

I think the ASA block screws are 10-32, but they could also be 8-32... been awhile since I messed with a Promaster.

Perhaps Toestr has some specs?

[Cdn_Cuda]

Manual:

https://www.manualslib.com/manual/2174921/Indian-Creek-Design-Promaster.html

I owned one a long time ago. Was a pretty good shooter. Even bought a fancy ram for it. Remember very little else about the gun unfortunately.

[Bonjwa]

Manual:

https://www.manualslib.com/manual/2174921/Indian-Creek-Design-Promaster.html

I owned one a long time ago. Was a pretty good shooter. Even bought a fancy ram for it. Remember very little else about the gun unfortunately.

Thank you! I'm gonna spend an intimate evening with the parts diagram on page 12. Thanks for your help on both of my threads!

also Jordan 10-32, you were dead on.

[Toestr]

I'd recommend picking up one of their parts kits rather than an oring kit. Ask them if they can throw in a few of the grip screws while you're at it. They were having problems with their reg seats last time I spoke with them. They're crappy regs anyway so replace if you can.

Anyway I can check the threading on the screws if you'd like. Probably a common size. Should be able to pick them up at bolts plus or in a Princess Auto screw kit. Might not be the same driver size though.

Sent from my Pixel 4a using Tapatalk