Alright so I installed the tornado valve, lightning bolt, shock tech lpc, Light springs for valve and main. Bolt and striker are well lubed but not polished. My aka 2liter is maxed at what I assume is 350Psi(maximum range according to aka.) It shoots my tiny redemption pro around 270fps with the rva backed off all the way. But...if I pull the trigger when the breech is empty it will jackhammer until the tank runs dry or I crank the on/off. Is my pressure too low? Could the vert adapter be starving the valve just enough to cause the issue?
-
-
Your main spring could be too soft if it not a vertical adapter issue.Dealer for: Roasted coffee and TechT products. -
It's pretty common to not cycle without a ball. A venturi bolt helps, but also can make it harder to get to velocityFeedback
www.PhrameworkDesigns.com < Nelspot sears and triggers back in stock! Also Sterling feeds, Empire feedneck adapters, and some upcoming projects.Comment
-
Well I drilled the vert adapter out to .201. The jackhammer is less intense, but still present. I suppose if it’s common to not cycle without a ball I’ll just live with it, though maybe I’ll swap springs next trip to the field and see what happens. Otherwise I’m filling a 62/3k with a hand pump.Comment
-
I will second the fact that sometimes stacked tube blowbacks sometimes don’t like to fully cycle without paint. No particular rhyme or reason. I’ve definitely seen it happen with stock spyders, so not an LP only thing.Comment
Comment