I think I've finally decided on everything once and for all for this ever-changing build. This should hopefully be the "end all" pump for me. The idea of this is also to be a proprietary sniper, with integrated rods and no 3 way hole in the vert. ASA.
Body: Dust black Mozak custom body kit builder "blank" full sized vertical feed with rounded top, wire detent, vertical ASA without 3 way hole and threaded for CCM secondary guide rod. AKA wire detent, Sconi feedneck, Shocktech Super Fly bolt (for now). "CCM marker" main guide rod, so there will be no plate for the pump kit similar to a T2 etc.
Lower tube: AKA cocking rod, Inception IVG, Inception hammer spring (one of the lighter ones) Shocktech Phat hammer, ANS stainless o-ring jam nut, Palmer's low turbulence valve and spring.
Frame: Dust black Mozak thick 45 hinge frame with finger grooves, Hogue palm swell grip panels.
Air stuff: Inception EZ ASA and rail, AKA short Sidewinder.
Pump kit: As mentioned above, secondary guide rod will be integrated into the vertical ASA, main guide rod directly into banjo hole. I really like the way the Slice kits look and feel, so I wiill likely go with one of the new v3 Slice pump handles when they're released + stainless pump arm (no AT hole).
Body: Dust black Mozak custom body kit builder "blank" full sized vertical feed with rounded top, wire detent, vertical ASA without 3 way hole and threaded for CCM secondary guide rod. AKA wire detent, Sconi feedneck, Shocktech Super Fly bolt (for now). "CCM marker" main guide rod, so there will be no plate for the pump kit similar to a T2 etc.
Lower tube: AKA cocking rod, Inception IVG, Inception hammer spring (one of the lighter ones) Shocktech Phat hammer, ANS stainless o-ring jam nut, Palmer's low turbulence valve and spring.
Frame: Dust black Mozak thick 45 hinge frame with finger grooves, Hogue palm swell grip panels.
Air stuff: Inception EZ ASA and rail, AKA short Sidewinder.
Pump kit: As mentioned above, secondary guide rod will be integrated into the vertical ASA, main guide rod directly into banjo hole. I really like the way the Slice kits look and feel, so I wiill likely go with one of the new v3 Slice pump handles when they're released + stainless pump arm (no AT hole).
Comment