45 Frame

[nobbie333]

Does anybody know what 45 frame fits on a pmi body or pgp

[Lt. head-shot]

Only frames I know of that fit directly are T2 frames. Otherwise an adapter is needed to use cocker frames.

[XEMON]

All the cocker and mag frame will "fit" in the sense they have proper mounting holes spacing and the shear line up (you need to drill and inport the sheridan gut for the mag frame).

BUT, they all have flat top ... That's where the "adapter" comes in ... It's just to help relieve the stress and add some support. There is a few options:
- You can make your own, 3D print works well, there is some aluminum and brass ones out there.
- You can file/machine the top of the frame.
- You can solder a plate to the bottom of the Sheridan tube to convert it to "flat bottom"
- You can get the T2 frame
- There is also some sheridan frames that take M16 grip (then put a 45 grip on that)

I may be forgetting a few, but they will be on the fringe/un-common side of things ...

[nobbie333]

Does anybody know if blue fork design frame would work?

[Rusty Brass]

Which one? They made one specifically for Sheridans and a different one for Crosman airguns. Crosmans have different screw spacing and won't fit your brass gun.

[Flounder]

The BlueFork works well. Pretty much designed to go on Sheridan brass.

[nobbie333]

Thank you