Pgp upgrades

[cheapguitarscheapthrills]

Just received this bad Larry in the mail courtesy of Riot if you have coin he has wares. What upgrades do I need to make this playable? I'm assuming the speed changer for 12grams, some kind of speed loader, and a rear velocity adjuster. Any help with sourcing parts would be appreciated. Holds air and shoots but has a heavy pump stroke which I've heard is part of the charm for these.

PS anyone have experience with these Etsy 3d printed speed loaders?

[ChoSanJuan]

I don't have any experience with buying from Etsy or that seller. I printed my own. Since you are asking about buying, I mean, it looks legit enough and in the range I would sell for that kind of part.

[cheapguitarscheapthrills]

How's your playing experience with it? Just trying to see my options

[ChoSanJuan]

It's not the exact same design. It's straight feed and it uses OG sock locks for the speed feed. With a tube in the back, you can keep like 25 rds if you keep one of them in the chamber. Everything is off of thingiverse on my PGP.

[binson]

DocsMachine has some 12g speed changers if you reach out to him.
JeeperCreeper has a speed feed option if you're looking to keep to brass.

We're also waiting on netsurferdude2 who might have some other upgrades too.

[ChoSanJuan]

Since it's a huge PITA to post pics in comments, here's my PGP setup...




Picatinny rail, front cap, WGP grip frame tray (yes, that's a cocker slider on there ), Knurled pump handle, speedfeed. I really need to get around to hammering in detents...

[cheapguitarscheapthrills]

Very spacegun vibes, I like! Thanks for sharing

[stockclass48]

I have that same speed feed 3d printed setup, however I can't figure a way to put a backstop so that it can feed reliably like the Palmers one. Looks good though!

[JeeperCreeper]

Get the Doc's CO2 Changer. Detents are also a must. A lot of people just do wedgits, basically precise dents in the barrel to hold the ball. You can find a tutorial stickied in the Sheridan section. If you want a detent, send it to me. I can do cocker style, or a Planet Eclipse nubbin with a cover. Also check out HERE for valve stems and some other stuff.

[BrickHaus]

I personally never enjoyed that type of feed. I found I'd rock back too far back, and the paint skips over the feed port, and back up the tube. I'd recommend finding a parabolic feed plug if possible. Then it's a classic feed plug, with slower reloads. But the advantage, is your 10 shots can be much faster as the feed plug drives the front ball down into the barrel on the rock.

Speed changers are nice also. You will likely need to do some form of barrel work if you really want to use it. sheridan barrels are typicalls a large bore, and a straight bore. So rollout, and velocity issues are common with tiny paint. Re barreling requires hot work, but you can likely make it very shootable by pounding wigits into the barrel.