Really scratching my head on this one. Had a big game day and loaned it 2 years ago, was very busy at the time and didn’t notice all the paint that had gotten busted up inside of it until now. Before tear down, I put some air in it just to see what it was doing and was shooting incredibly hot. Didn’t have a chrono, but well over 300 fps in my estimation based on the curve balls and bark it was tearing off trees
despite the velocity screw being all the way in ( in case that’s a clue of something) but still recocked.
Doesn’t seem to be a low air issue. Same tanks on other blow backs are allowing function.
Orings are not for specific pro carb rebuild; spare cocker rings on bolt and valve ring, all else are for a 98c.
Post tear down and rebuild, it fires, but won’t recook itself. Still shooting hard, maybe slightly less than before. Any advice is appreciated, thank you.
despite the velocity screw being all the way in ( in case that’s a clue of something) but still recocked.
Doesn’t seem to be a low air issue. Same tanks on other blow backs are allowing function.
Orings are not for specific pro carb rebuild; spare cocker rings on bolt and valve ring, all else are for a 98c.
Post tear down and rebuild, it fires, but won’t recook itself. Still shooting hard, maybe slightly less than before. Any advice is appreciated, thank you.
Comment