What barrel/freak sizes do you commonly use?

[Pumpytrilly1]

I went paintballing and balls were falling through my 684 freak insert. What are common barrel sizes to use for todays paintballs?

[Grendel]

0.685 w/Wedgits or 0.684 Freak

[Nish]

Stella kit mostly. Usually end up going with .685, sometimes .680

[cellophane]

I've been using something around 0.685 or smaller for a while. Frequently 0.682 or less depending on the paint & weather.

Barrel selection depends on marker. For my DSR I usually use a Freak or Stella Kit, Cocker's all use the Stella Kit, and for my Prime I use the Shift 3 barrel.

[lew]

.684" for closed-bolt guns (most of what I have).

[Lt. head-shot]

682 and 684 are the only one's ive touched in recent times. 679 was tested but its a underbore for local paint here. I have 2 nearly full freak kits that I know feel stupid for buying.... would have saved me a ton just to have bought single inserts of the ones I use most.

[Altec]

I have a complete Freak kit, plus a TyMcneer .675 insert I use most of the time. It just well seasoned and works... I’ve had it going on 20 years. I use whatever size fits well.

i own a bunch of barrels like a Stella, Edge kit, Pipe kit, and tons of random barrels. My .688 Ti Boomstick gets used on most open bolts.

[Havoc]

.682 most often

[OpusX]

Snipers/Cockers get the .679, mag and emek get the .682.

[shadow191]

.684 prevents rollouts for field paint used here.

[ChuckLove]

I've been using .675 backs and Freak inserts when using my closed bolt guns. Typically .679-682 on my open bolt guns. This is with Valken Graffiti and GI 4 Star.

[Chuck E Ducky]

I use .684 -.680 most of the time. Occasionally I get rollouts on the .680 with some cheaper paints. I over bore on anything with functioning detents. I prefer having lots of bore options for my pumps.

[Jonnydread]

0.685 w/Wedgits

This is my preferred as well, but if that's not an option I usually rock dummy detents and a .679

[Handy]

I've been using my TyMcneer .678 in my Phantom, and usually the .679 from my freak kit for Snipers, Cockers, etc. Open bolt guns? Whatever the old J&J Ceramic bores out to, which I assume is big.

Sent from my Pixel 3 using Tapatalk

[Magmoormaster]

I've been using .675 exclusively for the last couple years.